Search
Thanks for Visiting Us At ASAP AOG!

Thanks for Visiting Us At ASAP AOG! Before You Go, Why Not Take a Look at Our Aircraft Parts Catalog? You Can Get One of the Most Competitive Quotes On the Market In 15 Minutes Or Less.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

Sps Technologies Inc SFT22-6-A12 Part with NSN 5305011020314 - Quote Now

Part No. : SFT22-6-A12
Alternate P/N: SFT226A12
Manufacturer : sps technologies inc
CAGE Code : 80539
NIIN : 01-102-0314
Item Name : screw close tolerance
FSC : 5305 screws
INC Code : 29294
NCB Code : 01
Country : USA
NA

Thank you for having an interest in our selection of Sps Technologies Inc products here on ASAP AOG. You have reached the Request for Quote (RFQ) page for part number SFT22-6-A12, where you can submit details on your needs to receive tailored pricing and procurement options from our staff. Before you get started, be sure to review the information below to confirm the details of this part number SFT22-6-A12. If you have any questions, we are always available by phone or email.

Part Number SFT22-6-A12 Details:
 
Part number SFT22-6-A12 traces back to Sps Technologies Inc through the CAGE Code (CAGE Code 80539), commonly listed with the item name Screw Close Tolerance. Classified with the NSN 5305011020314, this part number has the NIIN 011020314, the INC 29294, and NCB code 01 (USA). For further details, this component belongs to the Federal Supply Group (FSG) 53 Hardware and Abrasives and Federal Supply Class (FSC) 5305 Screws.


Please Fill Out Below Form
Required fields compulsory *

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Note : We will not share your information to any third parties.


NSN Information for Part Number SFT22-6-A12 with NSN 5305-01-102-0314, 5305011020314

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-102-0314

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050110203140N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
SFT22-6-A12223

Characteristics Data of NSN 5305-01-102-0314, 5305011020314

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.374 INCHES MINIMUM AND 0.441 INCHES MAXIMUM
AASBFASTENER LENGTH1.134 INCHES MINIMUM AND 1.181 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.698 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
AAURGRIP DIAMETER0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLEOFFSET CRUCIFORM TORQUE SET)
AHYMNOMINAL THREAD DIAMETER0.375 INCHES
ANEEGRIP LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH24
CQBCMINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATTMATERIALSTEEL COMP H11 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTCADMIUM OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF

  Similar NSN Part Numbers to SFT22-6-A12