| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.391 INCHES MINIMUM" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.765 INCHES MAXIMUM" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES" |
| ADJS | EXTERIOR COLOR | NATURAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY" |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 17.250 INCHES NOMINAL WORKING" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- BOTH ENDS CHAFE GUARD,POLYVINYL CHLORIDE ACETATE, INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| ZZZK | SPECIFICATION/STANDARD DATA | MIL MIL-H-38360,SIZE 8 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.391 INCHES MINIMUM" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.765 INCHES MAXIMUM" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES" |
| ADJS | EXTERIOR COLOR | NATURAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY" |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 17.250 INCHES NOMINAL WORKING" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- BOTH ENDS CHAFE GUARD,POLYVINYL CHLORIDE ACETATE, INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| ZZZK | SPECIFICATION/STANDARD DATA | MIL MIL-H-38360,SIZE 8 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION" |
