| MRC | Criteria | Characteristic |
|---|
| AASA | THREAD LENGTH | 0.062 INCHES NOMINAL 2ND MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.312 INCHES NOMINAL 1ST MOUNTING FACILITY |
| ABHP | OVERALL LENGTH | 3.067 INCHES MINIMUM AND 3.129 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| ABNB | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ABNC | FLAT HEIGHT | 0.213 INCHES MINIMUM SINGLE ACTUATOR AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM SINGLE ACTUATOR AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.688 INCHES NOMINAL SINGLE ACTUATOR |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 12 00 OCLOCK |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDC | NONTURN DEVICE TYPE | TAB AT 12 00 OCLOCK |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.365 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.385 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 2 SINGLE SECTION FRONT |
| AKPY | THROW QUANTITY | 10 SINGLE SECTION FRONT |
| AXGY | MOUNTING METHOD | THREADED BUSHING 1ST MOUNTING FACILITY |
| AXGY | MOUNTING METHOD | THREADED HOLE 2ND MOUNTING FACILITY |
| CMLP | THREAD QUANTITY PER INCH | 32 1ST MOUNTING FACILITY |
| CMLP | THREAD QUANTITY PER INCH | 32 2ND MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES 2ND MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 1ST MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 300.0 AC AT SEA LEVEL |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | 150.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CQYJ | MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE 2ND MOUNTING FACILITY |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 11 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION FRONT |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 15.0 DEGREES SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 300.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CTHF | CONTACT LOAD CURRENT RATING | 50.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| FEAT | SPECIAL FEATURES | NO DETENT MECHANISM-MTG HARDWARE NOT SUPPLIED-SHAFT EXTENDS FROM REAR 1.160 IN,IS PARALLEL FLATTED W/ 3RD FLAT 0.250 IN FROM END |
| STYL | STYLE DESIGNATOR | SQUARE WAFER,PANEL MOUNT |
| THSD | THREAD SERIES DESIGNATOR | UNC 2ND MOUNTING FACILITY |
| THSD | THREAD SERIES DESIGNATOR | UNEF 1ST MOUNTING FACILITY |
