| MRC | Criteria | Characteristic |
|---|
| AAQL | | " |
| ADAQ | BODY LENGTH | 2.500 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 2.250 INCHES NOMINAL" |
| ADTV | CASE MATERIAL | PLASTIC" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.938 INCHES NOMINAL" |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.062 INCHES NOMINAL" |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL" |
| AJEC | BOSS HEIGHT | 0.140 INCHES NOMINAL" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.481 INCHES NOMINAL" |
| AKPX | POLE QUANTITY | 3" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 THREADED HOLE" |
| CBBL | FEATURES PROVIDED | SLIDING BAR INTERLOCK AND HIGH INRUSH PROTECTION" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 40.0 AMPERES AC ALL LOCATIONS" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 240.0 AC ALL LOCATIONS" |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 5000.0 AC ALL LOCATIONS" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC ALL LOCATIONS" |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS" |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS" |
| CPRP | ULTIMATE TRIP TIME PER POLE IN SECONDS | 10.000 MINIMUM ALL LOCATIONS" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 3 TOGGLE" |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE" |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, AND THREE LINKED" |
| CPRZ | AUXILIARY SWITCH FUNCTION AND QUANTITY | 1 ALARM" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS" |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES" |
| CQSM | SWITCH LOCATION AND POSITION DESIGNATION | EXTERNAL AT POLE ONE" |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 3.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS AND 0.300 MINIMUM AT 500 PCT ALL LOCATIONS AND 1.500 MAXIMUM AT 500 PCT ALL LOCATIONS" |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | FUNGUS RESISTANT AND MOISTURE RESISTANT" |
| CRTK | SWITCH TERMINAL TYPE | TAB, SOLDER LUG" |
| CSSX | SWITCH CURRENT RATING AND TYPE IN AMPS | 10.0 AC" |
| CSWP | SWITCH VOLTAGE RATING AND TYPE IN VOLTS | 250.0 AC" |
| FREQ | FREQUENCY IN HERTZ | 50.0 ALL LOCATIONS OR 60.0 ALL LOCATIONS" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 THREADED STUD" |
| AAQL | | " |
| ADAQ | BODY LENGTH | 2.500 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 2.250 INCHES NOMINAL" |
| ADTV | CASE MATERIAL | PLASTIC" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.938 INCHES NOMINAL" |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.062 INCHES NOMINAL" |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL" |
| AJEC | BOSS HEIGHT | 0.140 INCHES NOMINAL" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.481 INCHES NOMINAL" |
| AKPX | POLE QUANTITY | 3" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 THREADED HOLE" |
| CBBL | FEATURES PROVIDED | SLIDING BAR INTERLOCK AND HIGH INRUSH PROTECTION" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 40.0 AMPERES AC ALL LOCATIONS" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 240.0 AC ALL LOCATIONS" |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 5000.0 AC ALL LOCATIONS" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC ALL LOCATIONS" |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS" |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS" |
| CPRP | ULTIMATE TRIP TIME PER POLE IN SECONDS | 10.000 MINIMUM ALL LOCATIONS" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 3 TOGGLE" |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE" |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, AND THREE LINKED" |
| CPRZ | AUXILIARY SWITCH FUNCTION AND QUANTITY | 1 ALARM" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS" |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES" |
| CQSM | SWITCH LOCATION AND POSITION DESIGNATION | EXTERNAL AT POLE ONE" |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 3.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS AND 0.300 MINIMUM AT 500 PCT ALL LOCATIONS AND 1.500 MAXIMUM AT 500 PCT ALL LOCATIONS" |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | FUNGUS RESISTANT AND MOISTURE RESISTANT" |
| CRTK | SWITCH TERMINAL TYPE | TAB, SOLDER LUG" |
| CSSX | SWITCH CURRENT RATING AND TYPE IN AMPS | 10.0 AC" |
| CSWP | SWITCH VOLTAGE RATING AND TYPE IN VOLTS | 250.0 AC" |
| FREQ | FREQUENCY IN HERTZ | 50.0 ALL LOCATIONS OR 60.0 ALL LOCATIONS" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 THREADED STUD" |
