130C Joint Electronics Type Designation System NSN Part in Stock

Joint Electronics Type Designation System 130C Part with NSN 6625000695477 - Quote Now

Thank you for having an interest in our selection of Joint Electronics Type Designation System products here on ASAP AOG. You have reached the Request for Quote (RFQ) page for part number 130C, where you can submit details on your needs to receive tailored pricing and procurement options from our staff. Before you get started, be sure to review the information below to confirm the details of this part number 130C. If you have any questions, we are always available by phone or email.

Part Number 130C Details:

Part number 130C traces back to Joint Electronics Type Designation System through the CAGE Code (CAGE Code 80058), commonly listed with the item name Oscilloscope. Classified with the NSN 6625000695477, this part number has the NIIN 000695477, the INC 00357, and NCB code 00 (USA). For further details, this component belongs to the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Federal Supply Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments.

Please Fill Out Below Form

Required fields compulsory *

Mfg Part Number * :

Manufacturer * :

Quantity (ea) * :

Target Price (ea) USD :

Need Parts By * :

NSN :

Company Name * :

Company Type * :

Country of End Use * :

End Use * :

Contact Name * :

Phone * :

Email * :

Comments :

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Note : We will not share your information to any third parties.

Characteristics Data of NSN 6625-00-069-5477, 6625000695477

MRC	Criteria	Characteristic
AXGY	Mounting Method	RACK
AMSE	Voltage Rating	115.0 VOLTS MINIMUM AND 230.0 VOLTS MAXIMUM
FEAT	Special Features	PUSH BUTTON BEAM FINDER;INTERNAL GRATICULE CRT;COMMON MODE REFLECTION BELOW 40 DB FOR 0.2 7V/CM TO 0.2 V/CM,BELOW 30 DB FROM 0.5 V/CM TO 20 V/CM; PHASE SHIFT LESS THAN ONE DEGREE UP TO 100 KHZ;BALANCED INPUT ON ALL RANGES;FRONT PANEL SINGLE SWEEP SWITCH
ATES	Beam Quantity	1
ZZZV	Fsc Application Data	OSCILLOSCOPES,EXCEPT SPECIALLY DESIGNED
ABKW	Overall Height	6.781 INCHES NOMINAL
ACZB	Frequency Rating	50.0 HERTZ NOMINAL
FAAZ	Phase	SINGLE
BGQK	Screen Size	5.000 IN.
BGQN	Sweep Circuit Type	HORIZONTAL AND VERTICAL
BGQQ	Single Trigger Sweep Duration	500.0 SECONDS NOMINAL
BGQL	Sweep Circuits	INCLUDED
BGQM	Generator Driven Feature	INCLUDED
BGSC	Trigger Sweep Marker Intervals	0.2 USEC
BGRZ	Trigger Sweep Voltage Amplitude Rating	10.0 VOLTS NOMINAL
BGSB	Trigger Sweep Polarity Switch	INCLUDED
BHDD	Amplifier Deflection Sensitivity Provision	PROVIDED
ABMK	Overall Width	16.750 INCHES NOMINAL
BHDH	Input Intensity Modulation Feature	PROVIDED
BHDK	Visual Blanking Sensitivity Voltage Rating	20.0 VOLTS NOMINAL
BHDQ	X-Axis Frequency Response Rating	599.0 KILOHERTZ NOMINAL
BHDT	Amplifier Input Impedance Rating Provision	PROVIDED
BHDZ	Amplitude Calibrating Voltage Waveform	SQUARE WAVE
BHFC	Measurement Range Quantity	16
BHFH	Trace Storage Tube	NOT INCLUDED
BHDF	Vertical Deflection Sensitivity Voltage Rating	0.5 VOLTS MINIMUM RMS PER INCH AND 50.0 VOLTS MAXIMUM RMS PER INCH
BHDG	Horizontal Deflection Sensitivity Voltage Rating	0.5 VOLTS MINIMUM RMS PER INCH AND 50.0 VOLTS PEAK OUTSIDE DIAMETER
BHDL	Plate Direct Connection Deflection Sensitivity Provision	NOT PROVIDED
BHDP	Frequency Response Rating	PROVIDED
BHDW	X-Axis Input Impedance Rating	1.0 MEGOHMS NOMINAL
BHDX	Y-Axis Input Impedance Rating	1.0 MEGOHMS NOMINAL
BHFD	Measurement Range Steps	0 TO 20 V PER CM
BHFF	Calibrated Screen Scale	NOT INCLUDED
MRC	Decoded Requirement	Clear Text Reply
BDJD	Accuracy Range In Percent	-1
ACDC	Current Type	AC
BGQP	Sweep Frequency Range	+5.000/+10000.000 HERTZ
BGSD	Expanded Sweep	PROVIDED
BHDJ	Visual Modulation Sensitivity Voltage Rating	2.0 VOLTS NOMINAL
BHDR	Y-Axis Frequency Response Rating	500.0 KILOHERTZ NOMINAL
BHFB	Calibrating Peak To Peak Amplitude	10.0 MILLIVOLTS NOMINAL
BHFT	Camera Recording Device Accommodation	NOT PROVIDED
ABHP	Overall Length	18.375 INCHES NOMINAL

Part 130C With Different Manufacturers

130C

130-000-002L999	130-000-240REV01	130 4583	130 R 1 0603 ROHM	130 9595
130 4582	130 3284	130 8451	130 07 AL 8 32P	130 13
130 910	130 1995	130 6329	130 SWL	130 9446
130-0-007 REV A ITEM NO.24	130 1-4-30	130 56R1	130 8778	130 SGL
130 3280	130 12W 5 TA52	130 OHMS 18W 1	130 100F-2.5K	130 PF X 100V CAP

Joint Electronics Type Designation System 130C Part with NSN 6625000695477 - Quote Now

Characteristics Data of NSN 6625-00-069-5477, 6625000695477

Similar NSN Part Numbers to 130C

Part 130C With Different Manufacturers

130C

130C

130C

130C

130C

130C

130C