| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| AAVL | PILOT DIAMETER | 1.6250 INCHES NOMINAL |
| AAZX | SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 3.6240 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 3.3850 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2403 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7000 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGRS | DISTANCE BETWEEN FLANGES | 1.8120 INCHES NOMINAL |
| AHCG | MAXIMUM TEMP RISE | 35.0 DEG CELSIUS |
| AJSL | BODY SIZE | 37 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 830.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 9.25 WATTS MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 30.00 MINIMUM AND 40.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 35.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 170.00 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0 TO 36.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.900 INCH-OUNCES NOMINAL |
| AJWQ | PILOT LENGTH | 0.1600 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.6550 INCHES NOMINAL |
| AJWW | AFT OF SECOND FLANGE DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| CQWQ | SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| AAVH | SHOULDER DIAMETER | 3.3290 INCHES MINIMUM AND 3.3340 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 3.3740 INCHES MINIMUM AND 3.3750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.9500 INCHES NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 7.00 MINIMUM AND 10.00 MAXIMUM |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 5.0600 INCHES NOMINAL |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/74 GOVERNMENT SPECIFICATION |
