| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.047 INCHES MINIMUM AND 1.057 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.4365 INCHES MINIMUM AND 0.4365 INCHES MINIMUM AND 0.437 INCHES MAXIMUM0.437 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1243 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.250 INCHES NOMINAL0.250 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.6410 INCHES MINIMUM AND 0.6410 INCHES MINIMUM AND 0.6510 INCHES MAXIMUM0.6510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTEDROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALLBALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFTSINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 287.0 MINIMUM AND 287.0 MINIMUM AND 297.0 MAXIMUM297.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES1.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.75 INCH-OUNCES0.75 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.006 INCHES0.006 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES0.001 INCHES |
| APXH | TERMINAL LOCATION | REAR ENDREAR END |
| AXGY | MOUNTING METHOD | CLAMP RINGCLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION2.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
