58C2-500 Clarostat Sensors And Controls NSN Part in Stock

Clarostat Sensors And Controls 58C2-500 Part with NSN 5905012300391 - Quote Now

Part No. : 58C2-500

Alternate P/N: 58C2500

Manufacturer : clarostat sensors and controls

CAGE Code : 12697

NSN : 5905-01-230-0391

NIIN : 01-230-0391

Item Name : resistor variable wire wound non

FSC : 5905 resistors

FSG : 59 electrical and electronic equipment components

INC Code : 37406

NCB Code : 01

Country : USA

Thank you for having an interest in our selection of Clarostat Sensors And Controls products here on ASAP AOG. You have reached the Request for Quote (RFQ) page for part number 58C2-500, where you can submit details on your needs to receive tailored pricing and procurement options from our staff. Before you get started, be sure to review the information below to confirm the details of this part number 58C2-500. If you have any questions, we are always available by phone or email.

Part Number 58C2-500 Details:

Part number 58C2-500 traces back to Clarostat Sensors And Controls through the CAGE Code (CAGE Code 12697), commonly listed with the item name Resistor Variable Wire Wound Non. Classified with the NSN 5905012300391, this part number has the NIIN 012300391, the INC 37406, and NCB code 01 (USA). For further details, this component belongs to the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Federal Supply Class (FSC) 5905 Resistors.

Please Fill Out Below Form

Required fields compulsory *

Mfg Part Number * :

Manufacturer * :

Quantity (ea) * :

Target Price (ea) USD :

Need Parts By * :

NSN :

Company Name * :

Company Type * :

Country of End Use * :

End Use * :

Contact Name * :

Phone * :

Email * :

Comments :

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

Note : We will not share your information to any third parties.

NSN Information for Part Number 58C2-500 with NSN 5905-01-230-0391, 5905012300391

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-230-0391 Item Description: Resistor Variable Wire Wound Non	5905	012300391	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
58c2-500	5	9	5

Characteristics Data of NSN 5905-01-230-0391, 5905012300391

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.4375 INCHES MAXIMUM"
ABPM	BODY DIAMETER	1.7186 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.625 INCHES NOMINAL"
ADAP	MOUNTING BUSHING LENGTH	0.500 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.8125 INCHES MAXIMUM"
ADAV	III OVERALL DIAMETER	2.5625 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEDZ	SHAFT BEARING TYPE	SLEEVE"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	280.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	128.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.328 INCHES NOMINAL"
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED"
AGAV	III END ITEM IDENTIFICATION	NAVY EQUIP"
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	300.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	4.0 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.4375 INCHES MAXIMUM"
ABPM	BODY DIAMETER	1.7186 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.625 INCHES NOMINAL"
ADAP	MOUNTING BUSHING LENGTH	0.500 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.8125 INCHES MAXIMUM"
ADAV	III OVERALL DIAMETER	2.5625 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEDZ	SHAFT BEARING TYPE	SLEEVE"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	280.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	128.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.328 INCHES NOMINAL"
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED"
AGAV	III END ITEM IDENTIFICATION	NAVY EQUIP"
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	300.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	4.0 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"

58C66P-25-HIT	58C46661	58C256	58C1-25	58C1-75
58C46711	58C133410P1	58C46146-1	58C1-1K	58C46430
58C1	58C0169-000	58C2-3000	58C1-10	58C46662
58C2-3000 58C2-3K	58C2-25	58C256AP-85	58C256FPI-20	58C46213
58C803-001	58C20KS58C20	58C256FP20	58C65	58C46234-2

Clarostat Sensors And Controls 58C2-500 Part with NSN 5905012300391 - Quote Now

NSN Information for Part Number 58C2-500 with NSN 5905-01-230-0391, 5905012300391

Characteristics Data of NSN 5905-01-230-0391, 5905012300391

Similar NSN Part Numbers to 58C2-500