| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | MULTIPOLE-SINGLE ACTUATOR TYPE" |
| ADAQ | BODY LENGTH | 2.560 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 2.265 INCHES MAXIMUM" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.940 INCHES NOMINAL" |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL" |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.062 INCHES NOMINAL" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | CONSOLIDATED GROUND SUPPORT EQUIPMENT; PANEL, FRONT, AIRCRAFT; ANALYZER-CHARGER, BA; FACILITY TYPE EQUIPMENT" |
| AJEC | BOSS HEIGHT | 0.105 INCHES NOMINAL" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.520 INCHES NOMINAL" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 5.0 AMPERES AC ALL LOCATIONS" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 120.0 AC ALL LOCATIONS AND 240.0 AC ALL LOCATIONS" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 3 TOGGLE" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE" |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, AND THREE LINKED" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS" |
| FREQ | FREQUENCY IN HERTZ | 50.0 ALL LOCATIONS OR 60.0 ALL LOCATIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 THREADED STUD" |
| AAQL | BODY STYLE | MULTIPOLE-SINGLE ACTUATOR TYPE" |
| ADAQ | BODY LENGTH | 2.560 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 2.265 INCHES MAXIMUM" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.940 INCHES NOMINAL" |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL" |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.062 INCHES NOMINAL" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | CONSOLIDATED GROUND SUPPORT EQUIPMENT; PANEL, FRONT, AIRCRAFT; ANALYZER-CHARGER, BA; FACILITY TYPE EQUIPMENT" |
| AJEC | BOSS HEIGHT | 0.105 INCHES NOMINAL" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.520 INCHES NOMINAL" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 5.0 AMPERES AC ALL LOCATIONS" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 120.0 AC ALL LOCATIONS AND 240.0 AC ALL LOCATIONS" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 3 TOGGLE" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE" |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, AND THREE LINKED" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS" |
| FREQ | FREQUENCY IN HERTZ | 50.0 ALL LOCATIONS OR 60.0 ALL LOCATIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 THREADED STUD" |
