| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | ALUMINUM |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5990 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 1.9985 NOMINAL MILS AND 1.9995 NOMINAL CENTIMETERS |
| AAZX | SECOND SHOULDER LENGTH | 0.1700 NOMINAL MILS AND 0.1720 NOMINAL CENTIMETERS |
| ABHP | OVERALL LENGTH | 4.7430 INCHES MINIMUM AND 4.8550 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.9840 NOMINAL INCHES |
| ABWV | SHAFT DIAMETER | 0.2400 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.6100 INCHES MINIMUM SINGLE SHAFT AND 0.6300 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 8.0 MINIMUM AND 50.0 MAXIMUM |
| AJSP | STATOR INPUT CURRENT RATING | 40.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 200.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 570.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 260.30 MINIMUM AND 287.70 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 72.96 MINIMUM AND 80.43 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.164 INPUT TO OUTPUT MINIMUM AND 7.236 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 0.02 OUTPUT |
| AJWH | SHAFT END PLAY | 0.0060 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0430 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.4190 NOMINAL MILS AND 0.4200 NOMINAL CENTIMETERS |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.6170 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0020 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 3A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3100 INCHES MINIMUM SINGLE SHAFT AND 0.3400 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.240 INCHES SINGLE SHAFT |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| TEST | TEST DATA DOCUMENT | 10001-1233385 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 SCREW |
