| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | III BODY STYLE | ANGLE SHAPE, EXTERNAL COUPLING |
| ABHP | OVERALL LENGTH | 1.113 INCHES MINIMUM AND 1.143 INCHES MAXIMUM |
| ABKH | BUSHING DIAMETER | 0.082 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.500 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.500 INCHES NOMINAL |
| AFQL | DISTANCE FROM MOUNTING SHOULDER TO REAR FACE | 1.970 INCHES MINIMUM AND 1.980 INCHES MAXIMUM |
| AFQN | FLANGE LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | TNC SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 1500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CQTM | TERMINAL LOCATION | SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM | SHELL SURFACE TREATMENT | SILVER |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,ALLOY 360 FED SPEC SINGLE MATERIAL RESPONSE |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND SHELL SILVER |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ABKW | OVERALL HEIGHT | 2.697 INCHES MINIMUM AND 2.709 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | WATERPROOF |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AFRT | SHELL TYPE | SOLID |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,COMP HT FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | COPPER ALLOY 360 |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TYPE 2,GRADE A FED SPEC SINGLE TREATMENT RESPONSE |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY |
