NSN 5925-01-233-9297 (5925012339297) Circuit Breaker Parts Catalog

The part belongs to NSN 5925-01-233-9297 is an Circuit Breaker produced by Navair Ltd, Eaton Corp Heinemann Products Co, Sensata Technologies Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5925-01-233-9297 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Circuit Breaker made by Navair Ltd, Eaton Corp Heinemann Products Co, Sensata Technologies Inc that carries the NSN 5925-01-233-9297, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5925012339297 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJE	THREAD PITCH DIAMETERS	+0.3503/+0.3537 INCHES"
AAQL	BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE"
ABXD	BUSHING LENGTH	0.280 INCHES MINIMUM AND 0.380 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.562 INCHES MAXIMUM"
ADAT	BODY WIDTH	1.937 INCHES MAXIMUM"
ADTV	CASE MATERIAL	PLASTIC"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.906 INCHES MAXIMUM"
AEBQ	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.687 INCHES NOMINAL"
AEFN	NONTURN DEVICE LOCATION	AT 12 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.625 INCHES NOMINAL"
AEFS	NONTURN DEVICE DIAMETER	0.180 INCHES MINIMUM AND 0.300 INCHES MAXIMUM"
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.928 INCHES MAXIMUM"
AKPX	POLE QUANTITY	2"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL"
BBRG	STORAGE TYPE	GENERAL PURPOSE WAREHOUSE"
BBRJ	SPECIAL HANDLING FEATURE	MAGNETIC"
CMLP	THREAD QUANTITY PER INCH	32"
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	3.0 AMPERES AC ALL LOCATIONS"
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC ALL LOCATIONS"
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	300.0 AC ALL LOCATIONS"
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS"
CPRJ	TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS"
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS"
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS"
CPRQ	RESET METHOD	MANUAL"
CPRR	MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE"
CPRT	MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE"
CPRW	ACTUATOR FUNCTION	TRIP-RESET"
CPRX	ACTUATOR POSITION DESIGNATION	BETWEEN POLE ONE AND TWO"
CPRZ	AUXILIARY SWITCH FUNCTION AND QUANTITY	1 ALARM"
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS"
CQJX	NOMINAL THREAD SIZE	0.375 INCHES"
CQSM	SWITCH LOCATION AND POSITION DESIGNATION	INTERNAL AT POLE TWO"
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.200 MINIMUM AT 200 PCT ALL LOCATIONS AND 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS"
CQXF	INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND SHOCK RESISTANT AND SALT SPRAY PROOF"
CRTK	SWITCH TERMINAL TYPE	PIN"
CSSX	SWITCH CURRENT RATING AND TYPE IN AMPS	0.5 AC AND 0.5 DC"
CSWP	SWITCH VOLTAGE RATING AND TYPE IN VOLTS	120.0 AC AND 50.0 DC"
FREQ	FREQUENCY IN HERTZ	400.0 ALL LOCATIONS"
TEST	TEST DATA DOCUMENT	10001-3179574 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
THSD	THREAD SERIES DESIGNATOR	UNEF"
TTQY	TERMINAL TYPE AND QUANTITY	4 WIRE HOOK"
AAJE	THREAD PITCH DIAMETERS	+0.3503/+0.3537 INCHES"
AAQL	BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE"
ABXD	BUSHING LENGTH	0.280 INCHES MINIMUM AND 0.380 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.562 INCHES MAXIMUM"
ADAT	BODY WIDTH	1.937 INCHES MAXIMUM"
ADTV	CASE MATERIAL	PLASTIC"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.906 INCHES MAXIMUM"
AEBQ	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.687 INCHES NOMINAL"
AEFN	NONTURN DEVICE LOCATION	AT 12 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.625 INCHES NOMINAL"
AEFS	NONTURN DEVICE DIAMETER	0.180 INCHES MINIMUM AND 0.300 INCHES MAXIMUM"
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.928 INCHES MAXIMUM"
AKPX	POLE QUANTITY	2"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL"
BBRG	STORAGE TYPE	GENERAL PURPOSE WAREHOUSE"
BBRJ	SPECIAL HANDLING FEATURE	MAGNETIC"
CMLP	THREAD QUANTITY PER INCH	32"
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	3.0 AMPERES AC ALL LOCATIONS"
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC ALL LOCATIONS"
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	300.0 AC ALL LOCATIONS"
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS"
CPRJ	TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS"
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS"
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS"
CPRQ	RESET METHOD	MANUAL"
CPRR	MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE"
CPRT	MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE"
CPRW	ACTUATOR FUNCTION	TRIP-RESET"
CPRX	ACTUATOR POSITION DESIGNATION	BETWEEN POLE ONE AND TWO"
CPRZ	AUXILIARY SWITCH FUNCTION AND QUANTITY	1 ALARM"
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS"
CQJX	NOMINAL THREAD SIZE	0.375 INCHES"
CQSM	SWITCH LOCATION AND POSITION DESIGNATION	INTERNAL AT POLE TWO"
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.200 MINIMUM AT 200 PCT ALL LOCATIONS AND 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS"
CQXF	INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND SHOCK RESISTANT AND SALT SPRAY PROOF"
CRTK	SWITCH TERMINAL TYPE	PIN"
CSSX	SWITCH CURRENT RATING AND TYPE IN AMPS	0.5 AC AND 0.5 DC"
CSWP	SWITCH VOLTAGE RATING AND TYPE IN VOLTS	120.0 AC AND 50.0 DC"
FREQ	FREQUENCY IN HERTZ	400.0 ALL LOCATIONS"
TEST	TEST DATA DOCUMENT	10001-3179574 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
THSD	THREAD SERIES DESIGNATOR	UNEF"
TTQY	TERMINAL TYPE AND QUANTITY	4 WIRE HOOK"

MRC

Criteria

Characteristic

AAJE

THREAD PITCH DIAMETERS

+0.3503/+0.3537 INCHES"

AAQL

BODY STYLE

MULTIPOLE-SINGLE ACTUATOR TYPE"

ABXD

BUSHING LENGTH

0.280 INCHES MINIMUM AND 0.380 INCHES MAXIMUM"

ADAQ

BODY LENGTH

1.562 INCHES MAXIMUM"

ADAT

BODY WIDTH

1.937 INCHES MAXIMUM"

ADTV

CASE MATERIAL

PLASTIC"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

0.906 INCHES MAXIMUM"

AEBQ

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH

0.687 INCHES NOMINAL"

AEFN

NONTURN DEVICE LOCATION

AT 12 OCLOCK"

AEFP

NONTURN DEVICE RADIUS

0.625 INCHES NOMINAL"

AEFS

NONTURN DEVICE DIAMETER

0.180 INCHES MINIMUM AND 0.300 INCHES MAXIMUM"

AEGJ

SWITCH CONTACT ARRANGEMENT

SINGLE POLE, DOUBLE THROW"

AFJN

FRAGILITY FACTOR

MODERATELY RUGGED"

AJWX

MOUNTING SURFACE TO TERMINAL END DISTANCE

1.928 INCHES MAXIMUM"

AKPX

POLE QUANTITY

AXHR

MOUNTING FACILITY TYPE AND QUANTITY

1 THREADED BUSHING W/PANEL SEAL"

BBRG

STORAGE TYPE

GENERAL PURPOSE WAREHOUSE"

BBRJ

SPECIAL HANDLING FEATURE

MAGNETIC"

CMLP

THREAD QUANTITY PER INCH

32"

CPLM

MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE

3.0 AMPERES AC ALL LOCATIONS"

CPRF

OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS

240.0 AC ALL LOCATIONS"

CPRG

MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS

300.0 AC ALL LOCATIONS"

CPRH

CIRCUIT PROTECTION TYPE

OVERCURRENT ALL LOCATIONS"

CPRJ

TRIP RELEASE METHOD

MAGNETIC ALL LOCATIONS"

CPRL

TRIP RELEASE CHARACTERISTIC

TIME DELAY ALL LOCATIONS"

CPRN

ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT

115.0 ALL LOCATIONS"

CPRQ

RESET METHOD

MANUAL"

CPRR

MAIN CONTACT TRIPPING MECHANISM TYPE

TRIP FREE"

CPRT

MANUAL ACTUATOR TYPE AND QUANTITY

1 TOGGLE"

CPRW

ACTUATOR FUNCTION

TRIP-RESET"

CPRX

ACTUATOR POSITION DESIGNATION

BETWEEN POLE ONE AND TWO"

CPRZ

AUXILIARY SWITCH FUNCTION AND QUANTITY

1 ALARM"

CPSM

INTERNAL TRIP RELEASE CONFIGURATION

SERIES TRIP ALL LOCATIONS"

CQJX

NOMINAL THREAD SIZE

0.375 INCHES"

CQSM

SWITCH LOCATION AND POSITION DESIGNATION

INTERNAL AT POLE TWO"

CQWN

TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT

0.200 MINIMUM AT 200 PCT ALL LOCATIONS AND 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS"

CQXF

INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED

FUNGUS RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND SHOCK RESISTANT AND SALT SPRAY PROOF"

CRTK

SWITCH TERMINAL TYPE

PIN"

CSSX

SWITCH CURRENT RATING AND TYPE IN AMPS

0.5 AC AND 0.5 DC"

CSWP

SWITCH VOLTAGE RATING AND TYPE IN VOLTS

120.0 AC AND 50.0 DC"

FREQ

FREQUENCY IN HERTZ

400.0 ALL LOCATIONS"

TEST

TEST DATA DOCUMENT

10001-3179574 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"

THSD

THREAD SERIES DESIGNATOR

UNEF"

TTQY

TERMINAL TYPE AND QUANTITY

4 WIRE HOOK"