| MRC | Criteria | Characteristic |
|---|
| AAQL | | " |
| ADAQ | BODY LENGTH | 2.490 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 4.500 INCHES MAXIMUM" |
| ADTV | CASE MATERIAL | PLASTIC" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.928 INCHES NOMINAL" |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.060 INCHES NOMINAL" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL" |
| AJEC | BOSS HEIGHT | 0.150 INCHES NOMINAL" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.656 INCHES MAXIMUM" |
| AKPX | POLE QUANTITY | 6" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 12 THREADED HOLE" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 10.0 AMPERES AC ALL LOCATIONS AND 50.0 AMPERES DC ALL LOCATIONS" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 115.0 AC ALL LOCATIONS AND 28.0 DC ALL LOCATIONS" |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 1500.0 AC ALL LOCATIONS AND 2000.0 DC ALL LOCATIONS" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS" |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS" |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 6 TOGGLE" |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE" |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, THREE, FOUR, FIVE, AND SIX LINKED" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS" |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES" |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 0.150 MINIMUM AT 200 PCT ALL LOCATIONS AND 19.000 MAXIMUM AT 200 PCT ALL LOCATIONS" |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | CORROSION RESISTANT AND MOISTURE RESISTANT" |
| FREQ | FREQUENCY IN HERTZ | 400.0 ALL LOCATIONS" |
| TEST | TEST DATA DOCUMENT | 13499-260-1015 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 THREADED STUD" |
| AAQL | | " |
| ADAQ | BODY LENGTH | 2.490 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 4.500 INCHES MAXIMUM" |
| ADTV | CASE MATERIAL | PLASTIC" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.928 INCHES NOMINAL" |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.060 INCHES NOMINAL" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL" |
| AJEC | BOSS HEIGHT | 0.150 INCHES NOMINAL" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.656 INCHES MAXIMUM" |
| AKPX | POLE QUANTITY | 6" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 12 THREADED HOLE" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 10.0 AMPERES AC ALL LOCATIONS AND 50.0 AMPERES DC ALL LOCATIONS" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 115.0 AC ALL LOCATIONS AND 28.0 DC ALL LOCATIONS" |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 1500.0 AC ALL LOCATIONS AND 2000.0 DC ALL LOCATIONS" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS" |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS" |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 6 TOGGLE" |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE" |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE, TWO, THREE, FOUR, FIVE, AND SIX LINKED" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS" |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES" |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 0.150 MINIMUM AT 200 PCT ALL LOCATIONS AND 19.000 MAXIMUM AT 200 PCT ALL LOCATIONS" |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | CORROSION RESISTANT AND MOISTURE RESISTANT" |
| FREQ | FREQUENCY IN HERTZ | 400.0 ALL LOCATIONS" |
| TEST | TEST DATA DOCUMENT | 13499-260-1015 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 THREADED STUD" |
