NSN 5925-00-085-9076 (5925000859076) Circuit Breaker Parts Catalog

The part belongs to NSN 5925-00-085-9076 is an Circuit Breaker produced by Winco Inc, Pierce All Canada Ltd, Eaton Corp Heinemann Products Co. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5925-00-085-9076 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Circuit Breaker made by Winco Inc, Pierce All Canada Ltd, Eaton Corp Heinemann Products Co that carries the NSN 5925-00-085-9076, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5925000859076 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAQL	BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE"
ADAQ	BODY LENGTH	7.000 INCHES NOMINAL"
ADAT	BODY WIDTH	3.000 INCHES NOMINAL"
ADTV	CASE MATERIAL	PLASTIC"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	6.250 INCHES NOMINAL"
AEBQ	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	1.500 INCHES NOMINAL"
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.196 INCHES NOMINAL"
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	4.359 INCHES NOMINAL"
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.500 INCHES NOMINAL"
AJEC	BOSS HEIGHT	0.219 INCHES NOMINAL"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.688 INCHES NOMINAL"
AKPX	POLE QUANTITY	2"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE"
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	55.0 AMPERES DC ALL LOCATIONS"
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	32.0 DC ALL LOCATIONS"
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	50000.0 DC ALL LOCATIONS"
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS"
CPRJ	TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS"
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS"
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	145.0 ALL LOCATIONS"
CPRQ	RESET METHOD	MANUAL"
CPRR	MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE"
CPRT	MANUAL ACTUATOR TYPE AND QUANTITY	2 TOGGLE"
CPRW	ACTUATOR FUNCTION	TRIP-RESET"
CPRX	ACTUATOR POSITION DESIGNATION	AT EACH POLE"
CPRY	EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE AND TWO LINKED"
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS"
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	1.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 400.000 MAXIMUM AT 200 PCT ALL LOCATIONS"
CQXF	INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT"
TTQY	TERMINAL TYPE AND QUANTITY	4 THREADED STUD"
AAQL	BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE"
ADAQ	BODY LENGTH	7.000 INCHES NOMINAL"
ADAT	BODY WIDTH	3.000 INCHES NOMINAL"
ADTV	CASE MATERIAL	PLASTIC"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	6.250 INCHES NOMINAL"
AEBQ	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	1.500 INCHES NOMINAL"
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.196 INCHES NOMINAL"
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	4.359 INCHES NOMINAL"
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.500 INCHES NOMINAL"
AJEC	BOSS HEIGHT	0.219 INCHES NOMINAL"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	2.688 INCHES NOMINAL"
AKPX	POLE QUANTITY	2"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE"
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	55.0 AMPERES DC ALL LOCATIONS"
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	32.0 DC ALL LOCATIONS"
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	50000.0 DC ALL LOCATIONS"
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS"
CPRJ	TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS"
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS"
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	145.0 ALL LOCATIONS"
CPRQ	RESET METHOD	MANUAL"
CPRR	MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE"
CPRT	MANUAL ACTUATOR TYPE AND QUANTITY	2 TOGGLE"
CPRW	ACTUATOR FUNCTION	TRIP-RESET"
CPRX	ACTUATOR POSITION DESIGNATION	AT EACH POLE"
CPRY	EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE AND TWO LINKED"
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS"
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	1.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 400.000 MAXIMUM AT 200 PCT ALL LOCATIONS"
CQXF	INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT"
TTQY	TERMINAL TYPE AND QUANTITY	4 THREADED STUD"

MRC

Criteria

Characteristic

AAQL

BODY STYLE

MULTIPOLE-MULTIPLE ACTUATOR TYPE"

ADAQ

BODY LENGTH

7.000 INCHES NOMINAL"

ADAT

BODY WIDTH

3.000 INCHES NOMINAL"

ADTV

CASE MATERIAL

PLASTIC"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

6.250 INCHES NOMINAL"

AEBQ

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH

1.500 INCHES NOMINAL"

AEBV

UNTHREADED MOUNTING HOLE DIAMETER

0.196 INCHES NOMINAL"

AEBY

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH

4.359 INCHES NOMINAL"

AEHA

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH

1.500 INCHES NOMINAL"

AJEC

BOSS HEIGHT

0.219 INCHES NOMINAL"

AJWX

MOUNTING SURFACE TO TERMINAL END DISTANCE

2.688 INCHES NOMINAL"

AKPX

POLE QUANTITY

AXHR

MOUNTING FACILITY TYPE AND QUANTITY

4 UNTHREADED HOLE"

CPLM

MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE

55.0 AMPERES DC ALL LOCATIONS"

CPRF

OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS

32.0 DC ALL LOCATIONS"

CPRG

MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS

50000.0 DC ALL LOCATIONS"

CPRH

CIRCUIT PROTECTION TYPE

OVERCURRENT ALL LOCATIONS"

CPRJ

TRIP RELEASE METHOD

MAGNETIC-HYDRAULIC ALL LOCATIONS"

CPRL

TRIP RELEASE CHARACTERISTIC

TIME DELAY ALL LOCATIONS"

CPRN

ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT

145.0 ALL LOCATIONS"

CPRQ

RESET METHOD

MANUAL"

CPRR

MAIN CONTACT TRIPPING MECHANISM TYPE

TRIP FREE"

CPRT

MANUAL ACTUATOR TYPE AND QUANTITY

2 TOGGLE"

CPRW

ACTUATOR FUNCTION

TRIP-RESET"

CPRX

ACTUATOR POSITION DESIGNATION

AT EACH POLE"

CPRY

EXTERNAL ACTUATOR LINKAGE ARRANGEMENT

ONE AND TWO LINKED"

CPSM

INTERNAL TRIP RELEASE CONFIGURATION

SERIES TRIP ALL LOCATIONS"

CQWN

TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT

1.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 400.000 MAXIMUM AT 200 PCT ALL LOCATIONS"

CQXF

INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED

FUNGUS RESISTANT"

TTQY

TERMINAL TYPE AND QUANTITY

4 THREADED STUD"

AAQL

BODY STYLE

MULTIPOLE-MULTIPLE ACTUATOR TYPE"

ADAQ

BODY LENGTH

7.000 INCHES NOMINAL"

ADAT

BODY WIDTH

3.000 INCHES NOMINAL"

ADTV

CASE MATERIAL

PLASTIC"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

6.250 INCHES NOMINAL"

AEBQ

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH

1.500 INCHES NOMINAL"

AEBV

UNTHREADED MOUNTING HOLE DIAMETER

0.196 INCHES NOMINAL"

AEBY

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH

4.359 INCHES NOMINAL"

AEHA

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH

1.500 INCHES NOMINAL"

AJEC

BOSS HEIGHT

0.219 INCHES NOMINAL"

AJWX

MOUNTING SURFACE TO TERMINAL END DISTANCE

2.688 INCHES NOMINAL"

AKPX

POLE QUANTITY

AXHR

MOUNTING FACILITY TYPE AND QUANTITY

4 UNTHREADED HOLE"

CPLM

MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE

55.0 AMPERES DC ALL LOCATIONS"

CPRF

OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS

32.0 DC ALL LOCATIONS"

CPRG

MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS

50000.0 DC ALL LOCATIONS"

CPRH

CIRCUIT PROTECTION TYPE

OVERCURRENT ALL LOCATIONS"

CPRJ

TRIP RELEASE METHOD

MAGNETIC-HYDRAULIC ALL LOCATIONS"

CPRL

TRIP RELEASE CHARACTERISTIC

TIME DELAY ALL LOCATIONS"

CPRN

ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT

145.0 ALL LOCATIONS"

CPRQ

RESET METHOD

MANUAL"

CPRR

MAIN CONTACT TRIPPING MECHANISM TYPE

TRIP FREE"

CPRT

MANUAL ACTUATOR TYPE AND QUANTITY

2 TOGGLE"

CPRW

ACTUATOR FUNCTION

TRIP-RESET"

CPRX

ACTUATOR POSITION DESIGNATION

AT EACH POLE"

CPRY

EXTERNAL ACTUATOR LINKAGE ARRANGEMENT

ONE AND TWO LINKED"

CPSM

INTERNAL TRIP RELEASE CONFIGURATION

SERIES TRIP ALL LOCATIONS"

CQWN

TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT

1.000 MINIMUM AT 200 PCT ALL LOCATIONS AND 400.000 MAXIMUM AT 200 PCT ALL LOCATIONS"

CQXF

INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED

FUNGUS RESISTANT"

TTQY

TERMINAL TYPE AND QUANTITY

4 THREADED STUD"

NSN 5925-00-085-9076 (5925000859076) Circuit Breaker Parts Catalog

Manufacturer’s List for NSN 5925-00-085-9076

Part Number's List for NSN 5925-00-085-9076

Technical Characteristics of NSN 5925000859076

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts