NSN 5910-01-175-8145 (5910011758145) Capacitor Fixed Plastic Dielectr Parts Catalog

The part belongs to NSN 5910-01-175-8145 is an Capacitor Fixed Plastic Dielectr produced by Union Carbide Corp, Component Research Co Inc, Arizona Capacitors Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5910-01-175-8145 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Capacitor Fixed Plastic Dielectr made by Union Carbide Corp, Component Research Co Inc, Arizona Capacitors Inc that carries the NSN 5910-01-175-8145, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5910011758145 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAQL	BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABJT	TERMINAL LENGTH	1.250 INCHES MINIMUM"
ADAQ	BODY LENGTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.400 INCHES NOMINAL"
AEBT	TERMINAL DIAMETER	0.020 INCHES NOMINAL"
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)"
AFHW	INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL"
AGAV	END ITEM IDENTIFICATION	SIMULATOR,SIGNAL SM-790/FSQ-105"
CQBQ	CAPACITANCE VALUE PER SECTION	4700.000 PICOFARADS SINGLE SECTION"
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM"
CQLZ	TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION"
CQWM	NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	50.0 DC SINGLE SECTION"
CRHD	TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS	-100.0/+100.0 SINGLE SECTION"
CRTP	TOLERANCE RANGE PER SECTION	-2.00/+2.00 PERCENT SINGLE SECTION"
CWJK	CASE MATERIAL	PLASTIC"
CWPK	INSULATION RESISTANCE AT REFERENCE TEMP	15000.0 MEGOHMS"
CWPM	DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.450"
CWSG	TERMINAL SURFACE TREATMENT	SOLDER"
CWSS	DIELECTRIC MATERIAL	PLASTIC"
TTQY	TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD"
AAQL	BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABJT	TERMINAL LENGTH	1.250 INCHES MINIMUM"
ADAQ	BODY LENGTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.400 INCHES NOMINAL"
AEBT	TERMINAL DIAMETER	0.020 INCHES NOMINAL"
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)"
AFHW	INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL"
AGAV	END ITEM IDENTIFICATION	SIMULATOR,SIGNAL SM-790/FSQ-105"
CQBQ	CAPACITANCE VALUE PER SECTION	4700.000 PICOFARADS SINGLE SECTION"
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM"
CQLZ	TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION"
CQWM	NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	50.0 DC SINGLE SECTION"
CRHD	TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS	-100.0/+100.0 SINGLE SECTION"
CRTP	TOLERANCE RANGE PER SECTION	-2.00/+2.00 PERCENT SINGLE SECTION"
CWJK	CASE MATERIAL	PLASTIC"
CWPK	INSULATION RESISTANCE AT REFERENCE TEMP	15000.0 MEGOHMS"
CWPM	DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.450"
CWSG	TERMINAL SURFACE TREATMENT	SOLDER"
CWSS	DIELECTRIC MATERIAL	PLASTIC"
TTQY	TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD"

MRC

Criteria

Characteristic

AAQL

BODY STYLE

W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABJT

TERMINAL LENGTH

1.250 INCHES MINIMUM"

ADAQ

BODY LENGTH

0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

0.400 INCHES NOMINAL"

AEBT

TERMINAL DIAMETER

0.020 INCHES NOMINAL"

AEBZ

SCHEMATIC DIAGRAM DESIGNATOR

NO COMMON OR GROUNDED ELECTRODE(S)"

AFHW

INTERNAL ELECTRICAL CONNECTION TYPE

EXTENDED FOIL"

AGAV

END ITEM IDENTIFICATION

SIMULATOR,SIGNAL SM-790/FSQ-105"

CQBQ

CAPACITANCE VALUE PER SECTION

4700.000 PICOFARADS SINGLE SECTION"

CQJJ

NONDERATED OPERATING TEMP

-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM"

CQLZ

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS

0.0 SINGLE SECTION"

CQWM

NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION

50.0 DC SINGLE SECTION"

CRHD

TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS

-100.0/+100.0 SINGLE SECTION"

CRTP

TOLERANCE RANGE PER SECTION

-2.00/+2.00 PERCENT SINGLE SECTION"

CWJK

CASE MATERIAL

PLASTIC"

CWPK

INSULATION RESISTANCE AT REFERENCE TEMP

15000.0 MEGOHMS"

CWPM

DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT

0.450"

CWSG

TERMINAL SURFACE TREATMENT

SOLDER"

CWSS

DIELECTRIC MATERIAL

PLASTIC"

TTQY

TERMINAL TYPE AND QUANTITY

2 UNINSULATED WIRE LEAD"

AAQL

BODY STYLE

W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABJT

TERMINAL LENGTH

1.250 INCHES MINIMUM"

ADAQ

BODY LENGTH

0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

0.400 INCHES NOMINAL"

AEBT

TERMINAL DIAMETER

0.020 INCHES NOMINAL"

AEBZ

SCHEMATIC DIAGRAM DESIGNATOR

NO COMMON OR GROUNDED ELECTRODE(S)"

AFHW

INTERNAL ELECTRICAL CONNECTION TYPE

EXTENDED FOIL"

AGAV

END ITEM IDENTIFICATION

SIMULATOR,SIGNAL SM-790/FSQ-105"

CQBQ

CAPACITANCE VALUE PER SECTION

4700.000 PICOFARADS SINGLE SECTION"

CQJJ

NONDERATED OPERATING TEMP

-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM"

CQLZ

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS

0.0 SINGLE SECTION"

CQWM

NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION

50.0 DC SINGLE SECTION"

CRHD

TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS

-100.0/+100.0 SINGLE SECTION"

CRTP

TOLERANCE RANGE PER SECTION

-2.00/+2.00 PERCENT SINGLE SECTION"

CWJK

CASE MATERIAL

PLASTIC"

CWPK

INSULATION RESISTANCE AT REFERENCE TEMP

15000.0 MEGOHMS"

CWPM

DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT

0.450"

CWSG

TERMINAL SURFACE TREATMENT

SOLDER"

CWSS

DIELECTRIC MATERIAL

PLASTIC"

TTQY

TERMINAL TYPE AND QUANTITY

2 UNINSULATED WIRE LEAD"

NSN 5910-01-175-8145 (5910011758145) Capacitor Fixed Plastic Dielectr Parts Catalog

Manufacturer’s List for NSN 5910-01-175-8145

Part Number's List for NSN 5910-01-175-8145

Technical Characteristics of NSN 5910011758145

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts