NSN 5910-01-129-4161 (5910011294161) Capacitor Variable Ceramic Diele Parts Catalog

The part belongs to NSN 5910-01-129-4161 is an Capacitor Variable Ceramic Diele, Capacitor Variable Ceramic Dielectric produced by Vishay Sprague Inc, Microelectronics Ltd, Thales Aerospace. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5910-01-129-4161 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Capacitor Variable Ceramic Diele, Capacitor Variable Ceramic Dielectric made by Vishay Sprague Inc, Microelectronics Ltd, Thales Aerospace that carries the NSN 5910-01-129-4161, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5910011294161 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAQL	BODY STYLE	COMPRESSION"
ABJT	TERMINAL LENGTH	0.328 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.250 INCHES NOMINAL"
ADAT	BODY WIDTH	0.250 INCHES NOMINAL"
ADAU	BODY HEIGHT	0.125 INCHES NOMINAL"
AEBC	TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION"
AEBD	TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS	-150.0/+150.0 SINGLE SECTION"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.200 INCHES NOMINAL"
AEBT	TERMINAL DIAMETER	0.023 INCHES NOMINAL"
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.200 INCHES NOMINAL"
AECJ	QUALITY FACTOR AT 25 DEG CELSIUS	500.0"
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.200 INCHES NOMINAL"
AKNA	INCLOSURE TYPE	ENCASED"
AXGR	ADJUSTMENT DEVICE TORQUE	1.000 INCH-OUNCES MINIMUM AND 5.000 INCH-OUNCES MAXIMUM"
AXGT	INSULATION DC RESISTANCE AT 25 DEG CELSIUS	10.0 GIGOHMS"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 TERMINAL"
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"
CTGN	CAPACITANCE RANGE IN PICOFARADS	+1.1/+6.0 SINGLE SECTION"
CTGP	NONDERATED VOLTAGE RATING AND TYPE	50.0 DC CONTINUOUS SINGLE SECTION"
CTGR	ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY	1 SLOTTED SCREW"
FEAT	SPECIAL FEATURES	TWO DUMMY TERMINALS"
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACES GOLD"
PRMT	PRECIOUS MATERIAL	GOLD"
TTQY	TERMINAL TYPE AND QUANTITY	2 PIN"
AAQL	BODY STYLE	COMPRESSION"
ABJT	TERMINAL LENGTH	0.328 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.250 INCHES NOMINAL"
ADAT	BODY WIDTH	0.250 INCHES NOMINAL"
ADAU	BODY HEIGHT	0.125 INCHES NOMINAL"
AEBC	TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION"
AEBD	TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS	-150.0/+150.0 SINGLE SECTION"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.200 INCHES NOMINAL"
AEBT	TERMINAL DIAMETER	0.023 INCHES NOMINAL"
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.200 INCHES NOMINAL"
AECJ	QUALITY FACTOR AT 25 DEG CELSIUS	500.0"
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.200 INCHES NOMINAL"
AKNA	INCLOSURE TYPE	ENCASED"
AXGR	ADJUSTMENT DEVICE TORQUE	1.000 INCH-OUNCES MINIMUM AND 5.000 INCH-OUNCES MAXIMUM"
AXGT	INSULATION DC RESISTANCE AT 25 DEG CELSIUS	10.0 GIGOHMS"
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 TERMINAL"
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"
CTGN	CAPACITANCE RANGE IN PICOFARADS	+1.1/+6.0 SINGLE SECTION"
CTGP	NONDERATED VOLTAGE RATING AND TYPE	50.0 DC CONTINUOUS SINGLE SECTION"
CTGR	ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY	1 SLOTTED SCREW"
FEAT	SPECIAL FEATURES	TWO DUMMY TERMINALS"
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACES GOLD"
PRMT	PRECIOUS MATERIAL	GOLD"
TTQY	TERMINAL TYPE AND QUANTITY	2 PIN"

MRC

Criteria

Characteristic

AAQL

BODY STYLE

COMPRESSION"

ABJT

TERMINAL LENGTH

0.328 INCHES NOMINAL"

ADAQ

BODY LENGTH

0.250 INCHES NOMINAL"

ADAT

BODY WIDTH

0.250 INCHES NOMINAL"

ADAU

BODY HEIGHT

0.125 INCHES NOMINAL"

AEBC

TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS

0.0 SINGLE SECTION"

AEBD

TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS

-150.0/+150.0 SINGLE SECTION"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

0.200 INCHES NOMINAL"

AEBT

TERMINAL DIAMETER

0.023 INCHES NOMINAL"

AEBY

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH

0.200 INCHES NOMINAL"

AECJ

QUALITY FACTOR AT 25 DEG CELSIUS

500.0"

AEHA

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH

0.200 INCHES NOMINAL"

AKNA

INCLOSURE TYPE

ENCASED"

AXGR

ADJUSTMENT DEVICE TORQUE

1.000 INCH-OUNCES MINIMUM AND 5.000 INCH-OUNCES MAXIMUM"

AXGT

INSULATION DC RESISTANCE AT 25 DEG CELSIUS

10.0 GIGOHMS"

AXHR

MOUNTING FACILITY TYPE AND QUANTITY

4 TERMINAL"

CQJJ

NONDERATED OPERATING TEMP

-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"

CTGN

CAPACITANCE RANGE IN PICOFARADS

+1.1/+6.0 SINGLE SECTION"

CTGP

NONDERATED VOLTAGE RATING AND TYPE

50.0 DC CONTINUOUS SINGLE SECTION"

CTGR

ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY

1 SLOTTED SCREW"

FEAT

SPECIAL FEATURES

TWO DUMMY TERMINALS"

PMLC

PRECIOUS MATERIAL AND LOCATION

TERMINAL SURFACES GOLD"

PRMT

PRECIOUS MATERIAL

GOLD"

TTQY

TERMINAL TYPE AND QUANTITY

2 PIN"

AAQL

BODY STYLE

COMPRESSION"

ABJT

TERMINAL LENGTH

0.328 INCHES NOMINAL"

ADAQ

BODY LENGTH

0.250 INCHES NOMINAL"

ADAT

BODY WIDTH

0.250 INCHES NOMINAL"

ADAU

BODY HEIGHT

0.125 INCHES NOMINAL"

AEBC

TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS

0.0 SINGLE SECTION"

AEBD

TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS

-150.0/+150.0 SINGLE SECTION"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

0.200 INCHES NOMINAL"

AEBT

TERMINAL DIAMETER

0.023 INCHES NOMINAL"

AEBY

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH

0.200 INCHES NOMINAL"

AECJ

QUALITY FACTOR AT 25 DEG CELSIUS

500.0"

AEHA

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH

0.200 INCHES NOMINAL"

AKNA

INCLOSURE TYPE

ENCASED"

AXGR

ADJUSTMENT DEVICE TORQUE

1.000 INCH-OUNCES MINIMUM AND 5.000 INCH-OUNCES MAXIMUM"

AXGT

INSULATION DC RESISTANCE AT 25 DEG CELSIUS

10.0 GIGOHMS"

AXHR

MOUNTING FACILITY TYPE AND QUANTITY

4 TERMINAL"

CQJJ

NONDERATED OPERATING TEMP

-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"

CTGN

CAPACITANCE RANGE IN PICOFARADS

+1.1/+6.0 SINGLE SECTION"

CTGP

NONDERATED VOLTAGE RATING AND TYPE

50.0 DC CONTINUOUS SINGLE SECTION"

CTGR

ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY

1 SLOTTED SCREW"

FEAT

SPECIAL FEATURES

TWO DUMMY TERMINALS"

PMLC

PRECIOUS MATERIAL AND LOCATION

TERMINAL SURFACES GOLD"

PRMT

PRECIOUS MATERIAL

GOLD"

TTQY

TERMINAL TYPE AND QUANTITY

2 PIN"

NSN 5910-01-129-4161 (5910011294161) Capacitor Variable Ceramic Diele Parts Catalog

Manufacturer’s List for NSN 5910-01-129-4161

Part Number's List for NSN 5910-01-129-4161

Technical Characteristics of NSN 5910011294161

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts