NSN 5910-00-146-4184 (5910001464184) Capacitor Fixed Metallized Paper Parts Catalog

The part belongs to NSN 5910-00-146-4184 is an Capacitor Fixed Metallized Paper produced by Elpac Electronics In, Honeywell International Inc, Allied Signal Inc Aerospace Equi. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5910-00-146-4184 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Capacitor Fixed Metallized Paper made by Elpac Electronics In, Honeywell International Inc, Allied Signal Inc Aerospace Equi that carries the NSN 5910-00-146-4184, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5910001464184 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAQL	BODY STYLE	W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABJT	TERMINAL LENGTH	0.063 INCHES MINIMUM AND 0.094 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AEBT	TERMINAL DIAMETER	0.063 INCHES NOMINAL"
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)"
CQBQ	CAPACITANCE VALUE PER SECTION	4.700 MICROFARADS SINGLE SECTION"
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"
CQLZ	TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	50.0 SINGLE SECTION"
CQWM	NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	400.0 DC SINGLE SECTION"
CRTP	TOLERANCE RANGE PER SECTION	-20.00/+20.00 PERCENT SINGLE SECTION"
CWJK	CASE MATERIAL	PLASTIC"
CWPK	INSULATION RESISTANCE AT REFERENCE TEMP	100.0 MEGOHM-MICROFARADS"
CWPM	DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	1.000"
CWSG	TERMINAL SURFACE TREATMENT	SOLDER"
TTQY	TERMINAL TYPE AND QUANTITY	2 WIRE HOOK/LOOP"
AAQL	BODY STYLE	W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABJT	TERMINAL LENGTH	0.063 INCHES MINIMUM AND 0.094 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM"
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AEBT	TERMINAL DIAMETER	0.063 INCHES NOMINAL"
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)"
CQBQ	CAPACITANCE VALUE PER SECTION	4.700 MICROFARADS SINGLE SECTION"
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"
CQLZ	TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	50.0 SINGLE SECTION"
CQWM	NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	400.0 DC SINGLE SECTION"
CRTP	TOLERANCE RANGE PER SECTION	-20.00/+20.00 PERCENT SINGLE SECTION"
CWJK	CASE MATERIAL	PLASTIC"
CWPK	INSULATION RESISTANCE AT REFERENCE TEMP	100.0 MEGOHM-MICROFARADS"
CWPM	DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	1.000"
CWSG	TERMINAL SURFACE TREATMENT	SOLDER"
TTQY	TERMINAL TYPE AND QUANTITY	2 WIRE HOOK/LOOP"

MRC

Criteria

Characteristic

AAQL

BODY STYLE

W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABJT

TERMINAL LENGTH

0.063 INCHES MINIMUM AND 0.094 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM"

AEBP

CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

AEBT

TERMINAL DIAMETER

0.063 INCHES NOMINAL"

AEBZ

SCHEMATIC DIAGRAM DESIGNATOR

NO COMMON OR GROUNDED ELECTRODE(S)"

CQBQ

CAPACITANCE VALUE PER SECTION

4.700 MICROFARADS SINGLE SECTION"

CQJJ

NONDERATED OPERATING TEMP

-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM"

CQLZ

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS

50.0 SINGLE SECTION"

CQWM

NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION

400.0 DC SINGLE SECTION"

CRTP

TOLERANCE RANGE PER SECTION

-20.00/+20.00 PERCENT SINGLE SECTION"

CWJK

CASE MATERIAL

PLASTIC"

CWPK

INSULATION RESISTANCE AT REFERENCE TEMP

100.0 MEGOHM-MICROFARADS"

CWPM

DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT

1.000"

CWSG

TERMINAL SURFACE TREATMENT

SOLDER"

TTQY

TERMINAL TYPE AND QUANTITY

2 WIRE HOOK/LOOP"