NSN 5905-01-300-8268 (5905013008268) Resistor Variable Nonwire Wound Parts Catalog

The part belongs to NSN 5905-01-300-8268 is an Resistor Variable Nonwire Wound produced by Sensor Systems Inc, Honeywell Sensing And Control, Honeywell International Inc, Data Instruments Inc, Bei. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-01-300-8268 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Nonwire Wound made by Sensor Systems Inc, Honeywell Sensing And Control, Honeywell International Inc, Data Instruments Inc, Bei that carries the NSN 5905-01-300-8268, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905013008268 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
AAVL	PILOT DIAMETER	1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.0620 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	1.285 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0730 INCHES MINIMUM"
ABPM	BODY DIAMETER	1.437 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.510 INCHES MAXIMUM"
AECZ	MOUNTING LIP DIAMETER	1.4370 INCHES NOMINAL"
AEDA	MOUNTING LIP DEPTH	0.0930 INCHES NOMINAL"
AEDX	SHAFT STYLE	ROUND"
AEDZ	SHAFT BEARING TYPE	BEARING"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	340.0 MAXIMUM"
AEFK	MAXIMUM STARTING TORQUE	0.60 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	0.40 INCH-OUNCES"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AGAV	END ITEM IDENTIFICATION	PANEL,CONTROL"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	CLAMP RING"
CBBL	FEATURES PROVIDED	HUMIDITY PROOF"
CBME	III CUBIC MEASURE	2.448 CUBIC INCHES"
CQCC	ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL"
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50/+0.50 SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION"
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION"
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	75.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	03956-1803993 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
AAVL	PILOT DIAMETER	1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.0620 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	1.285 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0730 INCHES MINIMUM"
ABPM	BODY DIAMETER	1.437 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.510 INCHES MAXIMUM"
AECZ	MOUNTING LIP DIAMETER	1.4370 INCHES NOMINAL"
AEDA	MOUNTING LIP DEPTH	0.0930 INCHES NOMINAL"
AEDX	SHAFT STYLE	ROUND"
AEDZ	SHAFT BEARING TYPE	BEARING"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	340.0 MAXIMUM"
AEFK	MAXIMUM STARTING TORQUE	0.60 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	0.40 INCH-OUNCES"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AGAV	END ITEM IDENTIFICATION	PANEL,CONTROL"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	CLAMP RING"
CBBL	FEATURES PROVIDED	HUMIDITY PROOF"
CBME	III CUBIC MEASURE	2.448 CUBIC INCHES"
CQCC	ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL"
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50/+0.50 SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION"
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION"
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	75.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	03956-1803993 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL SERVO MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

AAVL

PILOT DIAMETER

1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM"

AAVM

PILOT LENGTH

0.0620 INCHES NOMINAL"

ABPA

UNDERCUT DIAMETER

1.285 INCHES NOMINAL"

ABPC

UNDERCUT WIDTH

0.0730 INCHES MINIMUM"

ABPM

BODY DIAMETER

1.437 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM"

ADAQ

BODY LENGTH

1.510 INCHES MAXIMUM"

AECZ

MOUNTING LIP DIAMETER

1.4370 INCHES NOMINAL"

AEDA

MOUNTING LIP DEPTH

0.0930 INCHES NOMINAL"

AEDX

SHAFT STYLE

ROUND"

AEDZ

SHAFT BEARING TYPE

BEARING"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

340.0 MAXIMUM"

AEFK

MAXIMUM STARTING TORQUE

0.60 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

0.40 INCH-OUNCES"

AFJN

FRAGILITY FACTOR

MODERATELY RUGGED"

AGAV

END ITEM IDENTIFICATION

PANEL,CONTROL"

APXH

TERMINAL LOCATION

RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"

AXGY

MOUNTING METHOD

CLAMP RING"

CBBL

FEATURES PROVIDED

HUMIDITY PROOF"

CBME

III CUBIC MEASURE

2.448 CUBIC INCHES"

CQCC

ELECTRICAL RESISTANCE PER SECTION

5.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

360.0 NOMINAL"

CQFL

FUNCTION CONFORMITY TOLERANCE PER SECTION

-0.50/+0.50 SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

125.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

1.0 FREE AIR SINGLE SECTION"

CRGM

FUNCTION CONFORMITY PER SECTION

SINGLE SECTION INDEPENDENT LINEARITY"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CONTINUOUS MOTION"

CSBX

FUNCTION CHARACTERISTIC PER SECTION

SINGLE SECTION LINEAR"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

75.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

03956-1803993 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"

TTQY

TERMINAL TYPE AND QUANTITY

3 TAB, SOLDER LUG"