NSN 5905-01-008-4032 (5905010084032) Resistor Variable Nonwire Wound Parts Catalog

The part belongs to NSN 5905-01-008-4032 is an Resistor Variable Nonwire Wound produced by Vernitron Corp, Bourns Inc, Precision Specialty Corp. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-01-008-4032 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Nonwire Wound made by Vernitron Corp, Bourns Inc, Precision Specialty Corp that carries the NSN 5905-01-008-4032, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905010084032 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	OVERALL LENGTH	0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM"
ABJT	TERMINAL LENGTH	0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM"
ABKW	OVERALL HEIGHT	0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
ABMK	OVERALL WIDTH	0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AEFD	ACTUATOR TYPE	FLUSH DRIVE WITH SLOT-HOLE"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	9000.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	10.00 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	10.00 INCH-OUNCES"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	TERMINAL"
CBBL	FEATURES PROVIDED	HERMETICALLY SEALED AND HUMIDITY PROOF"
CBME	III CUBIC MEASURE	0.059 CUBIC INCHES"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
CSDL	UNABLE TO DECODE	UNABLE TO DECODE"
TEST	TEST DATA DOCUMENT	18876-10670311 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	OVERALL LENGTH	0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM"
ABJT	TERMINAL LENGTH	0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM"
ABKW	OVERALL HEIGHT	0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
ABMK	OVERALL WIDTH	0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AEFD	ACTUATOR TYPE	FLUSH DRIVE WITH SLOT-HOLE"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	9000.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	10.00 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	10.00 INCH-OUNCES"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	TERMINAL"
CBBL	FEATURES PROVIDED	HERMETICALLY SEALED AND HUMIDITY PROOF"
CBME	III CUBIC MEASURE	0.059 CUBIC INCHES"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
CSDL	UNABLE TO DECODE	UNABLE TO DECODE"
TEST	TEST DATA DOCUMENT	18876-10670311 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

OVERALL LENGTH

0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM"

ABJT

TERMINAL LENGTH

0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM"

ABKW

OVERALL HEIGHT

0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

ABMK

OVERALL WIDTH

0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AEFD

ACTUATOR TYPE

FLUSH DRIVE WITH SLOT-HOLE"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

9000.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

10.00 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

10.00 INCH-OUNCES"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM"

AFJN

FRAGILITY FACTOR

MODERATELY RUGGED"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

TERMINAL"

CBBL

FEATURES PROVIDED

HERMETICALLY SEALED AND HUMIDITY PROOF"

CBME

III CUBIC MEASURE

0.059 CUBIC INCHES"

CQCC

ELECTRICAL RESISTANCE PER SECTION

2.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

9000.0 NOMINAL"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.75 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CLUTCH"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

CSDL

UNABLE TO DECODE

UNABLE TO DECODE"

TEST

TEST DATA DOCUMENT

18876-10670311 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA"

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

OVERALL LENGTH

0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM"

ABJT

TERMINAL LENGTH

0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM"

ABKW

OVERALL HEIGHT

0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

ABMK

OVERALL WIDTH

0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AEFD

ACTUATOR TYPE

FLUSH DRIVE WITH SLOT-HOLE"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

9000.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

10.00 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

10.00 INCH-OUNCES"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM"

AFJN

FRAGILITY FACTOR

MODERATELY RUGGED"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

TERMINAL"

CBBL

FEATURES PROVIDED

HERMETICALLY SEALED AND HUMIDITY PROOF"

CBME

III CUBIC MEASURE

0.059 CUBIC INCHES"

CQCC

ELECTRICAL RESISTANCE PER SECTION

2.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

9000.0 NOMINAL"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.75 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CLUTCH"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

CSDL

UNABLE TO DECODE

UNABLE TO DECODE"

TEST

TEST DATA DOCUMENT

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

NSN 5905-01-008-4032 (5905010084032) Resistor Variable Nonwire Wound Parts Catalog

Manufacturer’s List for NSN 5905-01-008-4032

Part Number's List for NSN 5905-01-008-4032

Technical Characteristics of NSN 5905010084032

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts