NSN 5905-00-938-3525 (5905009383525) Resistor Variable Nonwire Wound Parts Catalog

The part belongs to NSN 5905-00-938-3525 is an Resistor Variable Nonwire Wound produced by Sensor Systems Inc, Donel Systems Llc Div Donel Systems Llc, Miscellaneous, Bunker Ramo Corp Amphenol Controls Div, Axsys Technologies Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-938-3525 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Nonwire Wound made by Sensor Systems Inc, Donel Systems Llc Div Donel Systems Llc, Miscellaneous, Bunker Ramo Corp Amphenol Controls Div, Axsys Technologies Inc that carries the NSN 5905-00-938-3525, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905009383525 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
AAVL	PILOT DIAMETER	1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM"
ABHP	OVERALL LENGTH	1.542 INCHES NOMINAL"
ABJT	TERMINAL LENGTH	0.172 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	1.312 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0730 INCHES NOMINAL"
ABPM	BODY DIAMETER	1.453 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.120 INCHES NOMINAL"
ABXF	SHAFT LENGTH	0.672 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.870 INCHES NOMINAL"
ADAV	OVERALL DIAMETER	1.625 INCHES NOMINAL"
AECZ	MOUNTING LIP DIAMETER	1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM"
AEDA	MOUNTING LIP DEPTH	0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND"
AEDZ	SHAFT BEARING TYPE	BALL"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	350.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	0.70 INCH-OUNCES"
AEFZ	SHAFT RUNOUT	0.001 INCHES"
AEGA	LATERAL RUNOUT	0.002 INCHES"
AEGB	PILOT DIAMETER RUNOUT	0.001 INCHES"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	CLAMP RING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL"
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.10/+0.10 SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION"
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION"
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 TURRET"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
AAVL	PILOT DIAMETER	1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM"
ABHP	OVERALL LENGTH	1.542 INCHES NOMINAL"
ABJT	TERMINAL LENGTH	0.172 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	1.312 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0730 INCHES NOMINAL"
ABPM	BODY DIAMETER	1.453 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.120 INCHES NOMINAL"
ABXF	SHAFT LENGTH	0.672 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.870 INCHES NOMINAL"
ADAV	OVERALL DIAMETER	1.625 INCHES NOMINAL"
AECZ	MOUNTING LIP DIAMETER	1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM"
AEDA	MOUNTING LIP DEPTH	0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND"
AEDZ	SHAFT BEARING TYPE	BALL"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	350.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	0.70 INCH-OUNCES"
AEFZ	SHAFT RUNOUT	0.001 INCHES"
AEGA	LATERAL RUNOUT	0.002 INCHES"
AEGB	PILOT DIAMETER RUNOUT	0.001 INCHES"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	CLAMP RING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL"
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.10/+0.10 SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION"
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION"
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 TURRET"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL SERVO MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

AAVL

PILOT DIAMETER

1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM"

AAVM

PILOT LENGTH

0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM"

ABHP

OVERALL LENGTH

1.542 INCHES NOMINAL"

ABJT

TERMINAL LENGTH

0.172 INCHES NOMINAL"

ABPA

UNDERCUT DIAMETER

1.312 INCHES NOMINAL"

ABPC

UNDERCUT WIDTH

0.0730 INCHES NOMINAL"

ABPM

BODY DIAMETER

1.453 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.120 INCHES NOMINAL"

ABXF

SHAFT LENGTH

0.672 INCHES NOMINAL"

ADAQ

BODY LENGTH

0.870 INCHES NOMINAL"

ADAV

OVERALL DIAMETER

1.625 INCHES NOMINAL"

AECZ

MOUNTING LIP DIAMETER

1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM"

AEDA

MOUNTING LIP DEPTH

0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND"

AEDZ

SHAFT BEARING TYPE

BALL"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

350.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

0.70 INCH-OUNCES"

AEFZ

SHAFT RUNOUT

0.001 INCHES"

AEGA

LATERAL RUNOUT

0.002 INCHES"

AEGB

PILOT DIAMETER RUNOUT

0.001 INCHES"

APXH

TERMINAL LOCATION

RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"

AXGY

MOUNTING METHOD

CLAMP RING"

CQCC

ELECTRICAL RESISTANCE PER SECTION

10.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

360.0 NOMINAL"

CQFL

FUNCTION CONFORMITY TOLERANCE PER SECTION

-0.10/+0.10 SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

125.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

2.0 FREE AIR SINGLE SECTION"

CRGM

FUNCTION CONFORMITY PER SECTION

SINGLE SECTION INDEPENDENT LINEARITY"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CONTINUOUS MOTION"

CSBX

FUNCTION CHARACTERISTIC PER SECTION

SINGLE SECTION LINEAR"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

40.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

3 TURRET"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL SERVO MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

AAVL

PILOT DIAMETER

1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM"

AAVM

PILOT LENGTH

0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM"

ABHP

OVERALL LENGTH

1.542 INCHES NOMINAL"

ABJT

TERMINAL LENGTH

0.172 INCHES NOMINAL"

ABPA

UNDERCUT DIAMETER

1.312 INCHES NOMINAL"

ABPC

UNDERCUT WIDTH

0.0730 INCHES NOMINAL"

ABPM

BODY DIAMETER

1.453 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.120 INCHES NOMINAL"

ABXF

SHAFT LENGTH

0.672 INCHES NOMINAL"

ADAQ

BODY LENGTH

0.870 INCHES NOMINAL"

ADAV

OVERALL DIAMETER

1.625 INCHES NOMINAL"

AECZ

MOUNTING LIP DIAMETER

1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM"

AEDA

MOUNTING LIP DEPTH

0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND"

AEDZ

SHAFT BEARING TYPE

BALL"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

350.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

0.70 INCH-OUNCES"

AEFZ

SHAFT RUNOUT

0.001 INCHES"

AEGA

LATERAL RUNOUT

0.002 INCHES"

AEGB

PILOT DIAMETER RUNOUT

0.001 INCHES"

APXH

TERMINAL LOCATION

RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"

AXGY

MOUNTING METHOD

CLAMP RING"

CQCC

ELECTRICAL RESISTANCE PER SECTION

10.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

360.0 NOMINAL"

CQFL

FUNCTION CONFORMITY TOLERANCE PER SECTION

-0.10/+0.10 SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

125.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

2.0 FREE AIR SINGLE SECTION"

CRGM

FUNCTION CONFORMITY PER SECTION

SINGLE SECTION INDEPENDENT LINEARITY"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CONTINUOUS MOTION"

CSBX

FUNCTION CHARACTERISTIC PER SECTION

SINGLE SECTION LINEAR"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

40.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

3 TURRET"

axsys technologies inc	bunker ramo corp amphenol controls div	donel systems llc div donel systems llc	miscellaneous
sensor systems inc

NSN 5905-00-938-3525 (5905009383525) Resistor Variable Nonwire Wound Parts Catalog

Manufacturer’s List for NSN 5905-00-938-3525

Part Number's List for NSN 5905-00-938-3525

Technical Characteristics of NSN 5905009383525

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts