NSN 5905-00-912-7792 (5905009127792) Resistor Variable Wire Wound Non Parts Catalog

The part belongs to NSN 5905-00-912-7792 is an Resistor Variable Wire Wound Non produced by Clarostat Sensors An, Honeywell Sensing And Control, Data Instruments Inc, Samarius Precision Instruments Inc, Westinghouse Electric Corp. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-912-7792 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Non made by Clarostat Sensors An, Honeywell Sensing And Control, Data Instruments Inc, Samarius Precision Instruments Inc, Westinghouse Electric Corp that carries the NSN 5905-00-912-7792, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905009127792 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.610 INCHES MAXIMUM"
ABNB	FIRST FLAT LENGTH	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"
ABNC	FLAT HEIGHT	0.082 INCHES MAXIMUM"
ABPM	BODY DIAMETER	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM"
ADAP	MOUNTING BUSHING LENGTH	0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.580 INCHES MAXIMUM"
ADAV	III OVERALL DIAMETER	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, FLATTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	300.0 MINIMUM"
AEFK	MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 6 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM"
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	25.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-70.0 TO 70.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	97942-576R080H23 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.610 INCHES MAXIMUM"
ABNB	FIRST FLAT LENGTH	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"
ABNC	FLAT HEIGHT	0.082 INCHES MAXIMUM"
ABPM	BODY DIAMETER	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM"
ADAP	MOUNTING BUSHING LENGTH	0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.580 INCHES MAXIMUM"
ADAV	III OVERALL DIAMETER	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, FLATTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	300.0 MINIMUM"
AEFK	MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 6 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM"
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	25.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-70.0 TO 70.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	97942-576R080H23 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL BUSHING MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

1.610 INCHES MAXIMUM"

ABNB

FIRST FLAT LENGTH

0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"

ABNC

FLAT HEIGHT

0.082 INCHES MAXIMUM"

ABPM

BODY DIAMETER

0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM"

ADAP

MOUNTING BUSHING LENGTH

0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.580 INCHES MAXIMUM"

ADAV

III OVERALL DIAMETER

0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, FLATTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

300.0 MINIMUM"

AEFK

MAXIMUM STARTING TORQUE

6.00 INCH-OUNCES"

AEFN

NONTURN DEVICE LOCATION

AT 6 OCLOCK"

AEFP

NONTURN DEVICE RADIUS

0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM"

AJYN

SCREW THREAD DIAMETER

0.250 INCHES NOMINAL"

AJYP

SCREW THREAD SERIES DESIGNATOR

UNEF"

AJYQ

SCREW THREAD QUANTITY PER INCH

32.0"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

LOCKING BUSHING"

CQCC

ELECTRICAL RESISTANCE PER SECTION

25.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

330.0 NOMINAL"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-70.0 TO 70.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

2.0 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

STOPS"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

97942-576R080H23 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D"

TTQY

TERMINAL TYPE AND QUANTITY

3 TAB, SOLDER LUG"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL BUSHING MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

1.610 INCHES MAXIMUM"

ABNB

FIRST FLAT LENGTH

0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"

ABNC

FLAT HEIGHT

0.082 INCHES MAXIMUM"

ABPM

BODY DIAMETER

0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM"

ADAP

MOUNTING BUSHING LENGTH

0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.580 INCHES MAXIMUM"

ADAV

III OVERALL DIAMETER

0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, FLATTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

300.0 MINIMUM"

AEFK

MAXIMUM STARTING TORQUE

6.00 INCH-OUNCES"

AEFN

NONTURN DEVICE LOCATION

AT 6 OCLOCK"

AEFP

NONTURN DEVICE RADIUS

0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM"

AJYN

SCREW THREAD DIAMETER

0.250 INCHES NOMINAL"

AJYP

SCREW THREAD SERIES DESIGNATOR

UNEF"

AJYQ

SCREW THREAD QUANTITY PER INCH

32.0"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

LOCKING BUSHING"

CQCC

ELECTRICAL RESISTANCE PER SECTION

25.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

330.0 NOMINAL"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-70.0 TO 70.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

2.0 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

STOPS"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

TTQY

TERMINAL TYPE AND QUANTITY

3 TAB, SOLDER LUG"

clarostat sensors an	data instruments inc	honeywell sensing and control	samarius precision instruments inc
servo instrument corporation	westinghouse electric corp

NSN 5905-00-912-7792 (5905009127792) Resistor Variable Wire Wound Non Parts Catalog

Manufacturer’s List for NSN 5905-00-912-7792

Part Number's List for NSN 5905-00-912-7792

Technical Characteristics of NSN 5905009127792

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts