NSN 5905-00-898-2085 (5905008982085) Resistor Variable Nonwire Wound Parts Catalog

The part belongs to NSN 5905-00-898-2085 is an Resistor Variable Nonwire Wound produced by Miscellaneous, Bourns Inc, Paeaeesikunta Logistiikkaosasto, Lilbern Design Of Virginia Llc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-898-2085 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Nonwire Wound made by Miscellaneous, Bourns Inc, Paeaeesikunta Logistiikkaosasto, Lilbern Design Of Virginia Llc that carries the NSN 5905-00-898-2085, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905008982085 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABTB	MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	TERMINAL"
CBBL	FEATURES PROVIDED	NONMETALLIC SHAFT"
CQCC	ELECTRICAL RESISTANCE PER SECTION	20.0 KILOHMS SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-250.0/+250.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.8 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI"
TTQY	TERMINAL TYPE AND QUANTITY	3 WIRE LEAD"
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABTB	MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	TERMINAL"
CBBL	FEATURES PROVIDED	NONMETALLIC SHAFT"
CQCC	ELECTRICAL RESISTANCE PER SECTION	20.0 KILOHMS SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-250.0/+250.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.8 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI"
TTQY	TERMINAL TYPE AND QUANTITY	3 WIRE LEAD"
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES/SLOTS"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABTB

MOUNTING HOLE DIAMETER

0.093 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"

ADAQ

BODY LENGTH

1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

TERMINAL"

CBBL

FEATURES PROVIDED

NONMETALLIC SHAFT"

CQCC

ELECTRICAL RESISTANCE PER SECTION

20.0 KILOHMS SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-250.0/+250.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.8 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI"

TTQY

TERMINAL TYPE AND QUANTITY

3 WIRE LEAD"

ZZZK

SPECIFICATION/STANDARD DATA

81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES/SLOTS"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABTB

MOUNTING HOLE DIAMETER

0.093 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"

ADAQ

BODY LENGTH

1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

TERMINAL"

CBBL

FEATURES PROVIDED

NONMETALLIC SHAFT"

CQCC

ELECTRICAL RESISTANCE PER SECTION

20.0 KILOHMS SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-250.0/+250.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.8 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0/+10.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

TTQY

TERMINAL TYPE AND QUANTITY

3 WIRE LEAD"

ZZZK

SPECIFICATION/STANDARD DATA

81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION"

NSN 5905-00-898-2085 (5905008982085) Resistor Variable Nonwire Wound Parts Catalog

Manufacturer’s List for NSN 5905-00-898-2085

Part Number's List for NSN 5905-00-898-2085

Technical Characteristics of NSN 5905008982085

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts