NSN 5905-00-892-6695 (5905008926695) Resistor Variable Wire Wound Non Parts Catalog

The part belongs to NSN 5905-00-892-6695 is an Resistor Variable Wire Wound Non produced by Miscellaneous, Heico Ohmite Llc Dba Ohmite Mfg Co Inc, Eaton Aerospace Llc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-892-6695 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Non made by Miscellaneous, Heico Ohmite Llc Dba Ohmite Mfg Co Inc, Eaton Aerospace Llc that carries the NSN 5905-00-892-6695, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905008926695 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	2.952 INCHES MAXIMUM"
ABNB	FIRST FLAT LENGTH	0.344 INCHES NOMINAL"
ABNC	FLAT HEIGHT	0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM"
ABPM	BODY DIAMETER	4.060 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM"
ADAP	MOUNTING BUSHING LENGTH	0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM"
ADAQ	BODY LENGTH	2.030 INCHES MAXIMUM"
ADAV	III OVERALL DIAMETER	4.470 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, FLATTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFK	MAXIMUM STARTING TORQUE	48.00 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	240.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 12 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	50.0 OHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 315.0 MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	390.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	150.0 HEAT SINK SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	25.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-22/9 GOVERNMENT SPECIFICATION"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	2.952 INCHES MAXIMUM"
ABNB	FIRST FLAT LENGTH	0.344 INCHES NOMINAL"
ABNC	FLAT HEIGHT	0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM"
ABPM	BODY DIAMETER	4.060 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM"
ADAP	MOUNTING BUSHING LENGTH	0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM"
ADAQ	BODY LENGTH	2.030 INCHES MAXIMUM"
ADAV	III OVERALL DIAMETER	4.470 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, FLATTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFK	MAXIMUM STARTING TORQUE	48.00 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	240.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 12 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CQCC	ELECTRICAL RESISTANCE PER SECTION	50.0 OHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 315.0 MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	390.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	150.0 HEAT SINK SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	25.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-22/9 GOVERNMENT SPECIFICATION"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL BUSHING MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

2.952 INCHES MAXIMUM"

ABNB

FIRST FLAT LENGTH

0.344 INCHES NOMINAL"

ABNC

FLAT HEIGHT

0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM"

ABPM

BODY DIAMETER

4.060 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM"

ADAP

MOUNTING BUSHING LENGTH

0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM"

ADAQ

BODY LENGTH

2.030 INCHES MAXIMUM"

ADAV

III OVERALL DIAMETER

4.470 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, FLATTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFK

MAXIMUM STARTING TORQUE

48.00 INCH-OUNCES"

AEFM

MAXIMUM STOP TORQUE

240.00 INCH-OUNCES"

AEFN

NONTURN DEVICE LOCATION

AT 12 OCLOCK"

AEFP

NONTURN DEVICE RADIUS

0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"

AJYN

SCREW THREAD DIAMETER

0.375 INCHES NOMINAL"

AJYP

SCREW THREAD SERIES DESIGNATOR

UNEF"

AJYQ

SCREW THREAD QUANTITY PER INCH

32.0"

APXH

TERMINAL LOCATION

RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE"

AXGY

MOUNTING METHOD

LOCKING BUSHING"

CQCC

ELECTRICAL RESISTANCE PER SECTION

50.0 OHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

290.0 MINIMUM AND 315.0 MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

390.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

150.0 HEAT SINK SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0 TO 10.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

STOPS"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

25.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING"

TTQY

TERMINAL TYPE AND QUANTITY

3 TAB, SOLDER LUG"

ZZZK

SPECIFICATION/STANDARD DATA

81349-MIL-R-22/9 GOVERNMENT SPECIFICATION"