NSN 5905-00-882-6380 (5905008826380) Resistor Variable Wire Wound Non Parts Catalog

The part belongs to NSN 5905-00-882-6380 is an Resistor Variable Wire Wound Non produced by Svenska Philips Ab, Miscellaneous, Bourns Inc, L 3 Communications Elac Nautik Gmbh. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-882-6380 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Non made by Svenska Philips Ab, Miscellaneous, Bourns Inc, L 3 Communications Elac Nautik Gmbh that carries the NSN 5905-00-882-6380, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905008826380 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM"
ABJT	TERMINAL LENGTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"
ABKW	III OVERALL HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"
ABMK	III OVERALL WIDTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"
ABTB	MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
FEAT	SPECIAL FEATURES	SELF-LOCKING SHAFT"
PMLC	III PRECIOUS MATERIAL AND LOCATION	TERMINALS GOLD"
PRMT	III PRECIOUS MATERIAL	GOLD"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM"
ABJT	TERMINAL LENGTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"
ABKW	III OVERALL HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"
ABMK	III OVERALL WIDTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"
ABTB	MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM"
ADAQ	BODY LENGTH	1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
FEAT	SPECIAL FEATURES	SELF-LOCKING SHAFT"
PMLC	III PRECIOUS MATERIAL AND LOCATION	TERMINALS GOLD"
PRMT	III PRECIOUS MATERIAL	GOLD"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES/SLOTS"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM"

ABJT

TERMINAL LENGTH

0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"

ABKW

III OVERALL HEIGHT

0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"

ABMK

III OVERALL WIDTH

0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"

ABTB

MOUNTING HOLE DIAMETER

0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM"

ADAQ

BODY LENGTH

1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM"

AKPV

MOUNTING FACILITY QUANTITY

APXH

TERMINAL LOCATION

LOWER ADJACENT SIDE TWO ROWS"

AXGY

MOUNTING METHOD

UNTHREADED HOLE"

AYQR

CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS

0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM"

CQCC

ELECTRICAL RESISTANCE PER SECTION

2.0 KILOHMS SINGLE SECTION"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

105.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.5 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0 TO 10.0 SINGLE SECTION"

CSCY

TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS

-20.0 TO 20.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

70.0 SINGLE SECTION"

FEAT

SPECIAL FEATURES

SELF-LOCKING SHAFT"

PMLC

III PRECIOUS MATERIAL AND LOCATION

TERMINALS GOLD"

PRMT

III PRECIOUS MATERIAL

GOLD"

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES/SLOTS"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM"

ABJT

TERMINAL LENGTH

0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM"

ABKW

III OVERALL HEIGHT

0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"

ABMK

III OVERALL WIDTH

0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"

ABTB

MOUNTING HOLE DIAMETER

0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM"

ADAQ

BODY LENGTH

1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM"

AKPV

MOUNTING FACILITY QUANTITY

APXH

TERMINAL LOCATION

LOWER ADJACENT SIDE TWO ROWS"

AXGY

MOUNTING METHOD

UNTHREADED HOLE"

AYQR

CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS

0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM"

CQCC

ELECTRICAL RESISTANCE PER SECTION

2.0 KILOHMS SINGLE SECTION"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

105.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.5 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-10.0 TO 10.0 SINGLE SECTION"

CSCY

TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS

-20.0 TO 20.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

70.0 SINGLE SECTION"

FEAT

SPECIAL FEATURES

SELF-LOCKING SHAFT"

PMLC

III PRECIOUS MATERIAL AND LOCATION

TERMINALS GOLD"

PRMT

III PRECIOUS MATERIAL

GOLD"

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

NSN 5905-00-882-6380 (5905008826380) Resistor Variable Wire Wound Non Parts Catalog

Manufacturer’s List for NSN 5905-00-882-6380

Part Number's List for NSN 5905-00-882-6380

Technical Characteristics of NSN 5905008826380

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts