NSN 5905-00-854-3007 (5905008543007) Resistor Variable Wire Wound Pre Parts Catalog

The part belongs to NSN 5905-00-854-3007 is an Resistor Variable Wire Wound Pre produced by Servo Instrument Corporation, Vishay Thin Film Llc, Iv Electronic Klaus Vespermann Kg, Miscellaneous. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-854-3007 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Pre made by Servo Instrument Corporation, Vishay Thin Film Llc, Iv Electronic Klaus Vespermann Kg, Miscellaneous that carries the NSN 5905-00-854-3007, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905008543007 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
AAVL	PILOT DIAMETER	0.4372 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
ABPA	UNDERCUT DIAMETER	0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM"
ABPC	UNDERCUT WIDTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
ABPM	BODY DIAMETER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL"
ABXF	SHAFT LENGTH	0.500 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.705 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"
AECZ	MOUNTING LIP DIAMETER	0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM"
AEDA	MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	320.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	0.20 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	0.20 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	80.00 INCH-OUNCES"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	CLAMP RING"
CBBL	FEATURES PROVIDED	NONMETALLIC SHAFT"
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION"
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	325.0 SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 NOMINAL"
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50/+0.50 SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION"
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY"
CRJS	FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0/+5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION"
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0/+20.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG AND 1 TURRET"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
AAVL	PILOT DIAMETER	0.4372 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
ABPA	UNDERCUT DIAMETER	0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM"
ABPC	UNDERCUT WIDTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
ABPM	BODY DIAMETER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.125 INCHES NOMINAL"
ABXF	SHAFT LENGTH	0.500 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.705 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"
AECZ	MOUNTING LIP DIAMETER	0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM"
AEDA	MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	320.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	0.20 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	0.20 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	80.00 INCH-OUNCES"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	CLAMP RING"
CBBL	FEATURES PROVIDED	NONMETALLIC SHAFT"
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION"
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	325.0 SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 NOMINAL"
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50/+0.50 SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION"
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY"
CRJS	FIXED TAP QUANTITY PER SECTION	1 SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0/+5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION"
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0/+20.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG AND 1 TURRET"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL SERVO MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

AAVL

PILOT DIAMETER

0.4372 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM"

AAVM

PILOT LENGTH

0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"

ABPA

UNDERCUT DIAMETER

0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM"

ABPC

UNDERCUT WIDTH

0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"

ABPM

BODY DIAMETER

0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.125 INCHES NOMINAL"

ABXF

SHAFT LENGTH

0.500 INCHES NOMINAL"

ADAQ

BODY LENGTH

0.705 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"

AECZ

MOUNTING LIP DIAMETER

0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM"

AEDA

MOUNTING LIP DEPTH

0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

320.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

0.20 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

0.20 INCH-OUNCES"

AEFM

MAXIMUM STOP TORQUE

80.00 INCH-OUNCES"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

CLAMP RING"

CBBL

FEATURES PROVIDED

NONMETALLIC SHAFT"

CQCC

ELECTRICAL RESISTANCE PER SECTION

1.0 KILOHMS SINGLE SECTION"

CQCH

TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION

325.0 SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

330.0 NOMINAL"

CQFL

FUNCTION CONFORMITY TOLERANCE PER SECTION

-0.50/+0.50 SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

125.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

2.0 FREE AIR SINGLE SECTION"

CRGM

FUNCTION CONFORMITY PER SECTION

SINGLE SECTION INDEPENDENT LINEARITY"

CRJS

FIXED TAP QUANTITY PER SECTION

1 SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0/+5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CONTINUOUS MOTION"

CSBX

FUNCTION CHARACTERISTIC PER SECTION

SINGLE SECTION LINEAR"

CSCY

TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS

-20.0/+20.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

40.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

2 TAB, SOLDER LUG AND 1 TURRET"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

CYLINDRICAL SERVO MOUNTED"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

AAVL

PILOT DIAMETER

0.4372 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM"

AAVM

PILOT LENGTH

0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"

ABPA

UNDERCUT DIAMETER

0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM"

ABPC

UNDERCUT WIDTH

0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"

ABPM

BODY DIAMETER

0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.125 INCHES NOMINAL"

ABXF

SHAFT LENGTH

0.500 INCHES NOMINAL"

ADAQ

BODY LENGTH

0.705 INCHES MINIMUM AND 0.710 INCHES MAXIMUM"

AECZ

MOUNTING LIP DIAMETER

0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM"

AEDA

MOUNTING LIP DEPTH

0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

320.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

0.20 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

0.20 INCH-OUNCES"

AEFM

MAXIMUM STOP TORQUE

80.00 INCH-OUNCES"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

CLAMP RING"

CBBL

FEATURES PROVIDED

NONMETALLIC SHAFT"

CQCC

ELECTRICAL RESISTANCE PER SECTION

1.0 KILOHMS SINGLE SECTION"

CQCH

TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION

325.0 SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

330.0 NOMINAL"

CQFL

FUNCTION CONFORMITY TOLERANCE PER SECTION

-0.50/+0.50 SINGLE SECTION"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

125.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

2.0 FREE AIR SINGLE SECTION"

CRGM

FUNCTION CONFORMITY PER SECTION

SINGLE SECTION INDEPENDENT LINEARITY"

CRJS

FIXED TAP QUANTITY PER SECTION

1 SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0/+5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CONTINUOUS MOTION"

CSBX

FUNCTION CHARACTERISTIC PER SECTION

SINGLE SECTION LINEAR"

CSCY

TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS

-20.0/+20.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

40.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

2 TAB, SOLDER LUG AND 1 TURRET"

NSN 5905-00-854-3007 (5905008543007) Resistor Variable Wire Wound Pre Parts Catalog

Manufacturer’s List for NSN 5905-00-854-3007

Part Number's List for NSN 5905-00-854-3007

Technical Characteristics of NSN 5905008543007

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts