NSN 5905-00-434-1569 (5905004341569) Resistor Variable Wire Wound Non Parts Catalog

The part belongs to NSN 5905-00-434-1569 is an Resistor Variable Wire Wound Non produced by Miscellaneous, General Motors Corp Chevrolet Mo, Bourns Inc, Xerox Corp. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-434-1569 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Non made by Miscellaneous, General Motors Corp Chevrolet Mo, Bourns Inc, Xerox Corp that carries the NSN 5905-00-434-1569, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905004341569 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	ESTABLISHED"
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100"
ABHP	III OVERALL LENGTH	1.308 INCHES NOMINAL"
ABJT	TERMINAL LENGTH	0.500 INCHES NOMINAL"
ABKW	III OVERALL HEIGHT	0.815 INCHES NOMINAL"
ABMK	III OVERALL WIDTH	0.190 INCHES NOMINAL"
ABTB	MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.115 INCHES NOMINAL"
ABXF	SHAFT LENGTH	0.058 INCHES NOMINAL"
ADAQ	BODY LENGTH	1.250 INCHES NOMINAL"
ADAT	BODY WIDTH	0.190 INCHES NOMINAL"
ADAU	BODY HEIGHT	0.315 INCHES NOMINAL"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.700 INCHES NOMINAL"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	1.000 INCHES NOMINAL"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
CQCC	ELECTRICAL RESISTANCE PER SECTION	20.000 KILOHMS SINGLE SECTION"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.300 INCHES NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	81349-MIL-PRF-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLEC"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-PRF-27208/8 GOVERNMENT SPECIFICATION"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	ESTABLISHED"
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100"
ABHP	III OVERALL LENGTH	1.308 INCHES NOMINAL"
ABJT	TERMINAL LENGTH	0.500 INCHES NOMINAL"
ABKW	III OVERALL HEIGHT	0.815 INCHES NOMINAL"
ABMK	III OVERALL WIDTH	0.190 INCHES NOMINAL"
ABTB	MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.115 INCHES NOMINAL"
ABXF	SHAFT LENGTH	0.058 INCHES NOMINAL"
ADAQ	BODY LENGTH	1.250 INCHES NOMINAL"
ADAT	BODY WIDTH	0.190 INCHES NOMINAL"
ADAU	BODY HEIGHT	0.315 INCHES NOMINAL"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.700 INCHES NOMINAL"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	1.000 INCHES NOMINAL"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
CQCC	ELECTRICAL RESISTANCE PER SECTION	20.000 KILOHMS SINGLE SECTION"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.300 INCHES NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION"
TEST	TEST DATA DOCUMENT	81349-MIL-PRF-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLEC"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-PRF-27208/8 GOVERNMENT SPECIFICATION"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES/SLOTS"

AARG

RELIABILITY INDICATOR

ESTABLISHED"

AARH

RELIABILITY FAILURE RATE LEVEL IN PERCENT

0.100"

ABHP

III OVERALL LENGTH

1.308 INCHES NOMINAL"

ABJT

TERMINAL LENGTH

0.500 INCHES NOMINAL"

ABKW

III OVERALL HEIGHT

0.815 INCHES NOMINAL"

ABMK

III OVERALL WIDTH

0.190 INCHES NOMINAL"

ABTB

MOUNTING HOLE DIAMETER

0.093 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.115 INCHES NOMINAL"

ABXF

SHAFT LENGTH

0.058 INCHES NOMINAL"

ADAQ

BODY LENGTH

1.250 INCHES NOMINAL"

ADAT

BODY WIDTH

0.190 INCHES NOMINAL"

ADAU

BODY HEIGHT

0.315 INCHES NOMINAL"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.700 INCHES NOMINAL"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

1.000 INCHES NOMINAL"

AKPV

MOUNTING FACILITY QUANTITY

APXH

TERMINAL LOCATION

LOWER ADJACENT SIDE SINGLE ROW"

AXGY

MOUNTING METHOD

UNTHREADED HOLE"

CQCC

ELECTRICAL RESISTANCE PER SECTION

20.000 KILOHMS SINGLE SECTION"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.300 INCHES NOMINAL"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-50.0 TO 50.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.75 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

81349-MIL-PRF-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLEC"

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

ZZZK

SPECIFICATION/STANDARD DATA

81349-MIL-PRF-27208/8 GOVERNMENT SPECIFICATION"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES/SLOTS"

AARG

RELIABILITY INDICATOR

ESTABLISHED"

AARH

RELIABILITY FAILURE RATE LEVEL IN PERCENT

0.100"

ABHP

III OVERALL LENGTH

1.308 INCHES NOMINAL"

ABJT

TERMINAL LENGTH

0.500 INCHES NOMINAL"

ABKW

III OVERALL HEIGHT

0.815 INCHES NOMINAL"

ABMK

III OVERALL WIDTH

0.190 INCHES NOMINAL"

ABTB

MOUNTING HOLE DIAMETER

0.093 INCHES NOMINAL"

ABWV

SHAFT DIAMETER

0.115 INCHES NOMINAL"

ABXF

SHAFT LENGTH

0.058 INCHES NOMINAL"

ADAQ

BODY LENGTH

1.250 INCHES NOMINAL"

ADAT

BODY WIDTH

0.190 INCHES NOMINAL"

ADAU

BODY HEIGHT

0.315 INCHES NOMINAL"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.700 INCHES NOMINAL"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

1.000 INCHES NOMINAL"

AKPV

MOUNTING FACILITY QUANTITY

APXH

TERMINAL LOCATION

LOWER ADJACENT SIDE SINGLE ROW"

AXGY

MOUNTING METHOD

UNTHREADED HOLE"

CQCC

ELECTRICAL RESISTANCE PER SECTION

20.000 KILOHMS SINGLE SECTION"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.300 INCHES NOMINAL"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-50.0 TO 50.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.75 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

85.0 SINGLE SECTION"

TEST

TEST DATA DOCUMENT

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

ZZZK

SPECIFICATION/STANDARD DATA

81349-MIL-PRF-27208/8 GOVERNMENT SPECIFICATION"

NSN 5905-00-434-1569 (5905004341569) Resistor Variable Wire Wound Non Parts Catalog

Manufacturer’s List for NSN 5905-00-434-1569

Part Number's List for NSN 5905-00-434-1569

Technical Characteristics of NSN 5905004341569

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts