| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8750 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.750 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 1.125 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.625 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 2.210 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0015 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30/+0.30 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 80070-17-13339 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8750 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.750 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 1.125 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.625 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 2.210 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0015 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30/+0.30 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 80070-17-13339 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
