NSN 5905-00-130-9030 (5905001309030) Resistor Variable Wire Wound Non Parts Catalog

The part belongs to NSN 5905-00-130-9030 is an Resistor Variable Wire Wound Non produced by Kontron America Incorporated, Bourns Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-130-9030 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Non made by Kontron America Incorporated, Bourns Inc that carries the NSN 5905-00-130-9030, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905001309030 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM"
ABKW	III OVERALL HEIGHT	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"
ABMK	III OVERALL WIDTH	0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"
ABTD	MOUNTING SLOT WIDTH	0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.034 INCHES MINIMUM AND 0.036 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFK	MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	UPPER ADJACENT SIDE TWO ROWS"
AXGY	MOUNTING METHOD	SLOT"
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL"
CQCC	ELECTRICAL RESISTANCE PER SECTION	200.0 OHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-70.0 TO 70.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 WIRE LEAD"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM"
ABKW	III OVERALL HEIGHT	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"
ABMK	III OVERALL WIDTH	0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"
ABTD	MOUNTING SLOT WIDTH	0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.034 INCHES MINIMUM AND 0.036 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFK	MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	UPPER ADJACENT SIDE TWO ROWS"
AXGY	MOUNTING METHOD	SLOT"
AYQR	CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL"
CQCC	ELECTRICAL RESISTANCE PER SECTION	200.0 OHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-70.0 TO 70.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 WIRE LEAD"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM"

ABKW

III OVERALL HEIGHT

0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"

ABMK

III OVERALL WIDTH

0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"

ABTD

MOUNTING SLOT WIDTH

0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.034 INCHES MINIMUM AND 0.036 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFK

MAXIMUM STARTING TORQUE

5.00 INCH-OUNCES"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"

AKPV

MOUNTING FACILITY QUANTITY

APXH

TERMINAL LOCATION

UPPER ADJACENT SIDE TWO ROWS"

AXGY

MOUNTING METHOD

SLOT"

AYQR

CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS

0.100 INCHES NOMINAL"

CQCC

ELECTRICAL RESISTANCE PER SECTION

200.0 OHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

9000.0 NOMINAL"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-70.0 TO 70.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.5 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CLUTCH"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

70.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

3 WIRE LEAD"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR W/MOUNTING HOLES"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABHP

III OVERALL LENGTH

0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM"

ABKW

III OVERALL HEIGHT

0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"

ABMK

III OVERALL WIDTH

0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"

ABTD

MOUNTING SLOT WIDTH

0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.034 INCHES MINIMUM AND 0.036 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFK

MAXIMUM STARTING TORQUE

5.00 INCH-OUNCES"

AGTP

LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS

0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM"

AKPV

MOUNTING FACILITY QUANTITY

APXH

TERMINAL LOCATION

UPPER ADJACENT SIDE TWO ROWS"

AXGY

MOUNTING METHOD

SLOT"

AYQR

CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS

0.100 INCHES NOMINAL"

CQCC

ELECTRICAL RESISTANCE PER SECTION

200.0 OHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

9000.0 NOMINAL"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-70.0 TO 70.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

0.5 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CLUTCH"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

70.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

3 WIRE LEAD"

NSN 5905-00-130-9030 (5905001309030) Resistor Variable Wire Wound Non Parts Catalog

Manufacturer’s List for NSN 5905-00-130-9030

Part Number's List for NSN 5905-00-130-9030

Technical Characteristics of NSN 5905001309030

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts