NSN 5905-00-079-5957 (5905000795957) Resistor Variable Wire Wound Non Parts Catalog

The part belongs to NSN 5905-00-079-5957 is an Resistor Variable Wire Wound Non produced by Sfim Industries, Sagem Telecommunications, Raytheon Co, Vishay Thin Film Llc, Iv Electronic Klaus Vespermann Kg. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5905-00-079-5957 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Resistor Variable Wire Wound Non made by Sfim Industries, Sagem Telecommunications, Raytheon Co, Vishay Thin Film Llc, Iv Electronic Klaus Vespermann Kg that carries the NSN 5905-00-079-5957, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5905000795957 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABJT	TERMINAL LENGTH	0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.030 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.522 INCHES MINIMUM AND 0.538 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.482 INCHES MINIMUM AND 0.508 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEDZ	SHAFT BEARING TYPE	SLEEVE"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	9000.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM"
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	TERMINAL"
CBBL	FEATURES PROVIDED	HERMETICALLY SEALED"
CBME	III CUBIC MEASURE	0.054 CUBIC INCHES"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABJT	TERMINAL LENGTH	0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM"
ABWV	SHAFT DIAMETER	0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.030 INCHES MAXIMUM"
ADAQ	BODY LENGTH	0.522 INCHES MINIMUM AND 0.538 INCHES MAXIMUM"
ADAT	BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"
ADAU	BODY HEIGHT	0.482 INCHES MINIMUM AND 0.508 INCHES MAXIMUM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEDZ	SHAFT BEARING TYPE	SLEEVE"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	9000.0 NOMINAL"
AEFK	MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES"
AEFL	MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES"
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM"
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	TERMINAL"
CBBL	FEATURES PROVIDED	HERMETICALLY SEALED"
CBME	III CUBIC MEASURE	0.054 CUBIC INCHES"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL"
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION"
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN"

MRC

Criteria

Characteristic

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABJT

TERMINAL LENGTH

0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.030 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.522 INCHES MINIMUM AND 0.538 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.482 INCHES MINIMUM AND 0.508 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEDZ

SHAFT BEARING TYPE

SLEEVE"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

9000.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

5.00 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

5.00 INCH-OUNCES"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM"

AFJN

III FRAGILITY FACTOR

MODERATELY RUGGED"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

TERMINAL"

CBBL

FEATURES PROVIDED

HERMETICALLY SEALED"

CBME

III CUBIC MEASURE

0.054 CUBIC INCHES"

CQCC

ELECTRICAL RESISTANCE PER SECTION

2.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

9000.0 NOMINAL"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-50.0 TO 50.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

1.5 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CLUTCH"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

70.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

AAPN

SECTION QUANTITY

AAQL

BODY STYLE

RECTANGULAR"

AARG

RELIABILITY INDICATOR

NOT ESTABLISHED"

ABJT

TERMINAL LENGTH

0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM"

ABWV

SHAFT DIAMETER

0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM"

ABXF

SHAFT LENGTH

0.030 INCHES MAXIMUM"

ADAQ

BODY LENGTH

0.522 INCHES MINIMUM AND 0.538 INCHES MAXIMUM"

ADAT

BODY WIDTH

0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM"

ADAU

BODY HEIGHT

0.482 INCHES MINIMUM AND 0.508 INCHES MAXIMUM"

AEDX

SHAFT STYLE

ROUND, SLOTTED"

AEDZ

SHAFT BEARING TYPE

SLEEVE"

AEFD

ACTUATOR TYPE

SINGLE SHAFT"

AEFH

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION

9000.0 NOMINAL"

AEFK

MAXIMUM STARTING TORQUE

5.00 INCH-OUNCES"

AEFL

MAXIMUM RUNNING TORQUE

5.00 INCH-OUNCES"

AEHT

CENTER TO CENTER DISTANCE BETWEEN TERMINALS

0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM"

AFJN

III FRAGILITY FACTOR

MODERATELY RUGGED"

APXH

TERMINAL LOCATION

REAR END"

AXGY

MOUNTING METHOD

TERMINAL"

CBBL

FEATURES PROVIDED

HERMETICALLY SEALED"

CBME

III CUBIC MEASURE

0.054 CUBIC INCHES"

CQCC

ELECTRICAL RESISTANCE PER SECTION

2.0 KILOHMS SINGLE SECTION"

CQCK

ROTARY ACTUATOR TRAVEL IN ANGULAR DEG

9000.0 NOMINAL"

CQCM

CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL

0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM"

CQGN

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER

150.0 SINGLE SECTION"

CRFJ

TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS

-50.0 TO 50.0 SINGLE SECTION"

CRGD

POWER DISSIPATION RATING PER SECTION IN WATTS

1.5 FREE AIR SINGLE SECTION"

CRSS

RESISTANCE TOLERANCE PER SECTION IN PERCENT

-5.0 TO 5.0 SINGLE SECTION"

CRSX

ACTUATOR TRAVEL CONTROL FEATURE

CLUTCH"

CSDH

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER

70.0 SINGLE SECTION"

TTQY

TERMINAL TYPE AND QUANTITY

3 PIN"

iv electronic klaus vespermann kg	nai technologies inc	north atlantic industries inc	raytheon co
sagem telecommunications	sfim industries	vishay thin film llc

NSN 5905-00-079-5957 (5905000795957) Resistor Variable Wire Wound Non Parts Catalog

Manufacturer’s List for NSN 5905-00-079-5957

Part Number's List for NSN 5905-00-079-5957

Technical Characteristics of NSN 5905000795957

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts