NSN 5360-00-605-2715 (5360006052715) Spring Helical Compression Parts Catalog

The part belongs to NSN 5360-00-605-2715 is an Spring Helical Compression produced by General Motors Corp Ac Rochester, General Motors Corp, Delco Electronics, Woodward Governor Company. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5360-00-605-2715 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Spring Helical Compression made by General Motors Corp Ac Rochester, General Motors Corp, Delco Electronics, Woodward Governor Company that carries the NSN 5360-00-605-2715, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5360006052715 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AARX	INSIDE DIAMETER	1.028 INCHES NOMINAL"
ABQK	END STYLE	SPRING END,GROUND BOTH ENDS"
AGAV	END ITEM IDENTIFICATION	ALLISON JET ENGINES&COMPTS T-56"
AGEK	SPRING FREE LENGTH	1.156 INCHES NOMINAL"
AHQJ	ACCOMMODATED ROD DIAMETER	0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM"
APCN	COIL QUANTITY	4A"
ASZD	LOAD RATING	34.500 POUNDS NOMINAL"
AXJQ	SPRING SOLID LENGTH	0.530 INCHES NOMINAL"
AXLH	COIL HELIX DIRECTION	LEFT-HAND"
AXLQ	SPRING FREE OUTSIDE DIAMETER	1.272 INCHES NOMINAL"
CSZP	SPRING LENGTH UNDER LOAD	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
FEAT	SPECIAL FEATURES	HIGH SPEED SPRING"
MATT	MATERIAL	STEEL COMP 302 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S-316,SPRING WIRE MFR REF SINGLE MATERIAL RESPONSE OVERALL"
STYL	STYLE DESIGNATOR	CYLINDRICAL"
SUPP	SUPPLEMENTARY FEATURES	ADDITONAL LOAD OF 8.5 LBS SHALL GIVE ADDITIONAL COMPRESSION OF 0.095 IN.MIN. TO 0.105 IN. MAX. DO NOT EXCEED 43 LB LOAD WHEN TESTING. NORAML STRESS AT 43 LB LOAD IS 76.641 PSI. CORRECTED STRESS AT LOAD IS 88.050 PSI."
AARX	INSIDE DIAMETER	1.028 INCHES NOMINAL"
ABQK	END STYLE	SPRING END,GROUND BOTH ENDS"
AGAV	END ITEM IDENTIFICATION	ALLISON JET ENGINES&COMPTS T-56"
AGEK	SPRING FREE LENGTH	1.156 INCHES NOMINAL"
AHQJ	ACCOMMODATED ROD DIAMETER	0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM"
APCN	COIL QUANTITY	4A"
ASZD	LOAD RATING	34.500 POUNDS NOMINAL"
AXJQ	SPRING SOLID LENGTH	0.530 INCHES NOMINAL"
AXLH	COIL HELIX DIRECTION	LEFT-HAND"
AXLQ	SPRING FREE OUTSIDE DIAMETER	1.272 INCHES NOMINAL"
CSZP	SPRING LENGTH UNDER LOAD	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
FEAT	SPECIAL FEATURES	HIGH SPEED SPRING"
MATT	MATERIAL	STEEL COMP 302 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S-316,SPRING WIRE MFR REF SINGLE MATERIAL RESPONSE OVERALL"
STYL	STYLE DESIGNATOR	CYLINDRICAL"
SUPP	SUPPLEMENTARY FEATURES	ADDITONAL LOAD OF 8.5 LBS SHALL GIVE ADDITIONAL COMPRESSION OF 0.095 IN.MIN. TO 0.105 IN. MAX. DO NOT EXCEED 43 LB LOAD WHEN TESTING. NORAML STRESS AT 43 LB LOAD IS 76.641 PSI. CORRECTED STRESS AT LOAD IS 88.050 PSI."

MRC

Criteria

Characteristic

AARX

INSIDE DIAMETER

1.028 INCHES NOMINAL"

ABQK

END STYLE

SPRING END,GROUND BOTH ENDS"

AGAV

END ITEM IDENTIFICATION

ALLISON JET ENGINES&COMPTS T-56"

AGEK

SPRING FREE LENGTH

1.156 INCHES NOMINAL"

AHQJ

ACCOMMODATED ROD DIAMETER

0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM"

APCN

COIL QUANTITY

4A"

ASZD

LOAD RATING

34.500 POUNDS NOMINAL"

AXJQ

SPRING SOLID LENGTH

0.530 INCHES NOMINAL"

AXLH

COIL HELIX DIRECTION

LEFT-HAND"

AXLQ

SPRING FREE OUTSIDE DIAMETER

1.272 INCHES NOMINAL"

CSZP

SPRING LENGTH UNDER LOAD

0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"

FEAT

SPECIAL FEATURES

HIGH SPEED SPRING"

MATT

MATERIAL

STEEL COMP 302 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

S-316,SPRING WIRE MFR REF SINGLE MATERIAL RESPONSE OVERALL"

STYL

STYLE DESIGNATOR

CYLINDRICAL"

SUPP

SUPPLEMENTARY FEATURES

ADDITONAL LOAD OF 8.5 LBS SHALL GIVE ADDITIONAL COMPRESSION OF 0.095 IN.MIN. TO 0.105 IN. MAX. DO NOT EXCEED 43 LB LOAD WHEN TESTING. NORAML STRESS AT 43 LB LOAD IS 76.641 PSI. CORRECTED STRESS AT LOAD IS 88.050 PSI."