NSN 5340-01-576-7527 (5340015767527) Cap Plug Protective Dust And Moi Parts Catalog

The part belongs to NSN 5340-01-576-7527 is an Cap Plug Protective Dust And Moi produced by National Aerospace Standards Com, Caplugs Llc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-01-576-7527 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Cap Plug Protective Dust And Moi made by National Aerospace Standards Com, Caplugs Llc that carries the NSN 5340-01-576-7527, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340015767527 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AGAV	END ITEM IDENTIFICATION	6625-01-484-2782, THIRD ECHELON TEST SYSTEM"
ATZB	OPEN END INSIDE DIAMETER	0.933 INCHES NOMINAL"
BZMY	CLOSED END OVERALL DIAMETER	1.145 INCHES NOMINAL"
BZNB	LENGTH UNDER SHOULDER	0.750 NOMINAL INCHES"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CAP-PLUG T SERIES LPE"
FEAT	SPECIAL FEATURES	ID OF CLOSED END 0.995 INCHES NOMINAL;OPEN END HAS COUNTERSUNK OPENING AND OD IS 1.298 INCHES NOMINAL;CAP IS SHOULDERED AND OVERAL DIAMETER IS 1.310 INCHES NOMINAL;COLOR RED;SPECIFIC MATERIAL IS LOW DENSITY POLYETHYLENE;ITEM MAY HAVE MOLDIN"
MATT	MATERIAL	PLASTIC POLYETHYLENE"
ZZZK	SPECIFICATION/STANDARD DATA	80205-NAS 847 2-1-1998 WHICH REPLACED MIL-C-5501G 6-30-1989 AND MIL-C-52078 WHICH WAS CANCELLED IN 1979 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"
AGAV	END ITEM IDENTIFICATION	6625-01-484-2782, THIRD ECHELON TEST SYSTEM"
ATZB	OPEN END INSIDE DIAMETER	0.933 INCHES NOMINAL"
BZMY	CLOSED END OVERALL DIAMETER	1.145 INCHES NOMINAL"
BZNB	LENGTH UNDER SHOULDER	0.750 NOMINAL INCHES"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CAP-PLUG T SERIES LPE"
FEAT	SPECIAL FEATURES	ID OF CLOSED END 0.995 INCHES NOMINAL;OPEN END HAS COUNTERSUNK OPENING AND OD IS 1.298 INCHES NOMINAL;CAP IS SHOULDERED AND OVERAL DIAMETER IS 1.310 INCHES NOMINAL;COLOR RED;SPECIFIC MATERIAL IS LOW DENSITY POLYETHYLENE;ITEM MAY HAVE MOLDIN"
MATT	MATERIAL	PLASTIC POLYETHYLENE"
ZZZK	SPECIFICATION/STANDARD DATA	80205-NAS 847 2-1-1998 WHICH REPLACED MIL-C-5501G 6-30-1989 AND MIL-C-52078 WHICH WAS CANCELLED IN 1979 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"

MRC

Criteria

Characteristic

AGAV

END ITEM IDENTIFICATION

6625-01-484-2782, THIRD ECHELON TEST SYSTEM"

ATZB

OPEN END INSIDE DIAMETER

0.933 INCHES NOMINAL"

BZMY

CLOSED END OVERALL DIAMETER

1.145 INCHES NOMINAL"

BZNB

LENGTH UNDER SHOULDER

0.750 NOMINAL INCHES"

CXCY

PART NAME ASSIGNED BY CONTROLLING AGENCY

CAP-PLUG T SERIES LPE"

FEAT

SPECIAL FEATURES

ID OF CLOSED END 0.995 INCHES NOMINAL;OPEN END HAS COUNTERSUNK OPENING AND OD IS 1.298 INCHES NOMINAL;CAP IS SHOULDERED AND OVERAL DIAMETER IS 1.310 INCHES NOMINAL;COLOR RED;SPECIFIC MATERIAL IS LOW DENSITY POLYETHYLENE;ITEM MAY HAVE MOLDIN"

MATT

MATERIAL

PLASTIC POLYETHYLENE"

ZZZK

SPECIFICATION/STANDARD DATA

80205-NAS 847 2-1-1998 WHICH REPLACED MIL-C-5501G 6-30-1989 AND MIL-C-52078 WHICH WAS CANCELLED IN 1979 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"