Search By:
Thanks for Visiting Us At ASAP AOG!

Thanks for Visiting Us At ASAP AOG! Before You Go, Why Not Take a Look at Our Aircraft Parts Catalog? You Can Get One of the Most Competitive Quotes On the Market In 15 Minutes Or Less.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

NSN 5340-01-379-5167 (5340013795167) Bracket Double Angle Parts Catalog

The part belongs to NSN 5340-01-379-5167 is an Bracket Double Angle produced by Miscellaneous. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-01-379-5167 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Double Angle made by Miscellaneous that carries the NSN 5340-01-379-5167, you can rely on us to provide you with the necessary parts from our available inventory.


At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340013795167 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.


Alternative NSN: 5340-01-379-5167
Item Name: Bracket Double Angle
FSG: 53 Hardware and Abrasives
Federal Supply Class (FSC): 5340 Hardware, Commercial
NCB Code: USA (01)
Manufacturers: Miscellaneous

Manufacturer’s List for NSN 5340-01-379-5167

miscellaneous

Part Number's List for NSN 5340-01-379-5167

Part No.
Manufacturer
Item Name
Availability
RFQ
Bracket Double Angle
YES
RFQ

Technical Characteristics of NSN 5340013795167

MRCCriteriaCharacteristic
ACHYMOUNTING HOLE TYPEPLAIN
ADLKFIRST LEG LENGTH1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM
ADLLSECOND LEG LENGTH1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM
AHLKFIRST LEG HOLE DIAMETER0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM
AHPWFIRST LEG THICKNESS0.063 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.063 INCHES NOMINAL
AHPZCENTER SECTION HEIGHT2.030 INCHES MINIMUM AND 2.090 INCHES MAXIMUM
AHQACENTER SECTION WIDTH1.000 INCHES NOMINAL
AHQBCENTER SECTION THICKNESS0.063 INCHES NOMINAL
AHQNFIRST LEG WIDTH1.000 INCHES NOMINAL
AHQPFIRST LEG CORNER RADIUS0.060 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.141 INCHES NOMINAL
AJZUFIRST LEG STYLECORNER RADIUS
AKAUFIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
CSSRSECOND LEG ANGLE90.0 DEGREES NOMINAL
MATTMATERIALALUMINUM ALLOY 5052
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE
SFTTSURFACE TREATMENTANODIZE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TY 2 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE
STYLSTYLE DESIGNATORADJACENT ANGLES