NSN 5340-01-351-9218 (5340013519218) Bracket Double Angle Parts Catalog

The part belongs to NSN 5340-01-351-9218 is an Bracket Double Angle produced by Paeaeesikunta Logistiikkaosasto, Fastener Specialty Inc, Boeing Company, Trico Manufacturing Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-01-351-9218 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Double Angle made by Paeaeesikunta Logistiikkaosasto, Fastener Specialty Inc, Boeing Company, Trico Manufacturing Inc that carries the NSN 5340-01-351-9218, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340013519218 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN"
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL"
ADLL	SECOND LEG LENGTH	0.750 INCHES NOMINAL"
AHLF	SECOND LEG WIDTH	1.000 INCHES NOMINAL"
AHLG	SECOND LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHLK	FIRST LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL"
AHLZ	SECOND LEG SLOT LENGTH	0.720 INCHES NOMINAL"
AHMA	SECOND LEG SLOT WIDTH	0.220 INCHES NOMINAL"
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL"
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL"
AHPZ	CENTER SECTION HEIGHT	0.500 INCHES NOMINAL"
AHQA	CENTER SECTION WIDTH	1.000 INCHES NOMINAL"
AHQB	CENTER SECTION THICKNESS	0.050 INCHES NOMINAL"
AHQN	FIRST LEG WIDTH	1.000 INCHES NOMINAL"
AHQP	FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL"
AJZU	FIRST LEG STYLE	CORNER RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
AKBU	SECOND LEG STYLE	CORNER RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE SLOT"
CBBL	FEATURES PROVIDED	NUT"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	PLASTIC EPOXY AND PLASTIC POLYAMIDE"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	DOUBLE ANGLE"
ACHY	MOUNTING HOLE TYPE	PLAIN"
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL"
ADLL	SECOND LEG LENGTH	0.750 INCHES NOMINAL"
AHLF	SECOND LEG WIDTH	1.000 INCHES NOMINAL"
AHLG	SECOND LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHLK	FIRST LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL"
AHLZ	SECOND LEG SLOT LENGTH	0.720 INCHES NOMINAL"
AHMA	SECOND LEG SLOT WIDTH	0.220 INCHES NOMINAL"
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL"
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL"
AHPZ	CENTER SECTION HEIGHT	0.500 INCHES NOMINAL"
AHQA	CENTER SECTION WIDTH	1.000 INCHES NOMINAL"
AHQB	CENTER SECTION THICKNESS	0.050 INCHES NOMINAL"
AHQN	FIRST LEG WIDTH	1.000 INCHES NOMINAL"
AHQP	FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL"
AJZU	FIRST LEG STYLE	CORNER RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
AKBU	SECOND LEG STYLE	CORNER RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE SLOT"
CBBL	FEATURES PROVIDED	NUT"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	PLASTIC EPOXY AND PLASTIC POLYAMIDE"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	DOUBLE ANGLE"

MRC

Criteria

Characteristic

ACHY

MOUNTING HOLE TYPE

PLAIN"

ADLK

FIRST LEG LENGTH

0.750 INCHES NOMINAL"

ADLL

SECOND LEG LENGTH

0.750 INCHES NOMINAL"

AHLF

SECOND LEG WIDTH

1.000 INCHES NOMINAL"

AHLG

SECOND LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHLK

FIRST LEG HOLE DIAMETER

0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.250 INCHES NOMINAL"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.250 INCHES NOMINAL"

AHLZ

SECOND LEG SLOT LENGTH

0.720 INCHES NOMINAL"

AHMA

SECOND LEG SLOT WIDTH

0.220 INCHES NOMINAL"

AHPW

FIRST LEG THICKNESS

0.050 INCHES NOMINAL"

AHPX

SECOND LEG THICKNESS

0.050 INCHES NOMINAL"

AHPZ

CENTER SECTION HEIGHT

0.500 INCHES NOMINAL"

AHQA

CENTER SECTION WIDTH

1.000 INCHES NOMINAL"

AHQB

CENTER SECTION THICKNESS

0.050 INCHES NOMINAL"

AHQN

FIRST LEG WIDTH

1.000 INCHES NOMINAL"

AHQP

FIRST LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHQU

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.250 INCHES NOMINAL"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.250 INCHES NOMINAL"

AJZU

FIRST LEG STYLE

CORNER RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

AKBU

SECOND LEG STYLE

CORNER RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE SLOT"

CBBL

FEATURES PROVIDED

NUT"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

CSSR

SECOND LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

PLASTIC EPOXY AND PLASTIC POLYAMIDE"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

DOUBLE ANGLE"

ACHY

MOUNTING HOLE TYPE

PLAIN"

ADLK

FIRST LEG LENGTH

0.750 INCHES NOMINAL"

ADLL

SECOND LEG LENGTH

0.750 INCHES NOMINAL"

AHLF

SECOND LEG WIDTH

1.000 INCHES NOMINAL"

AHLG

SECOND LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHLK

FIRST LEG HOLE DIAMETER

0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.250 INCHES NOMINAL"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.250 INCHES NOMINAL"

AHLZ

SECOND LEG SLOT LENGTH

0.720 INCHES NOMINAL"

AHMA

SECOND LEG SLOT WIDTH

0.220 INCHES NOMINAL"

AHPW

FIRST LEG THICKNESS

0.050 INCHES NOMINAL"

AHPX

SECOND LEG THICKNESS

0.050 INCHES NOMINAL"

AHPZ

CENTER SECTION HEIGHT

0.500 INCHES NOMINAL"

AHQA

CENTER SECTION WIDTH

1.000 INCHES NOMINAL"

AHQB

CENTER SECTION THICKNESS

0.050 INCHES NOMINAL"

AHQN

FIRST LEG WIDTH

1.000 INCHES NOMINAL"

AHQP

FIRST LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHQU

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.250 INCHES NOMINAL"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.250 INCHES NOMINAL"

AJZU

FIRST LEG STYLE

CORNER RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

AKBU

SECOND LEG STYLE

CORNER RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE SLOT"

CBBL

FEATURES PROVIDED

NUT"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

CSSR

SECOND LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

PLASTIC EPOXY AND PLASTIC POLYAMIDE"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

DOUBLE ANGLE"

NSN 5340-01-351-9218 (5340013519218) Bracket Double Angle Parts Catalog

Manufacturer’s List for NSN 5340-01-351-9218

Part Number's List for NSN 5340-01-351-9218

Technical Characteristics of NSN 5340013519218

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts