NSN 5340-01-279-5807 (5340012795807) Bracket Angle Parts Catalog

The part belongs to NSN 5340-01-279-5807 is an Bracket Angle produced by Trico Manufacturing Inc, Fastener Specialty Inc, Boeing Company. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-01-279-5807 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Angle made by Trico Manufacturing Inc, Fastener Specialty Inc, Boeing Company that carries the NSN 5340-01-279-5807, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340012795807 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN"
ADLK	FIRST LEG LENGTH	0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"
AHLF	SECOND LEG WIDTH	1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"
AHLG	SECOND LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHLK	FIRST LEG HOLE DIAMETER	0.1645 INCHES MINIMUM AND 0.1675 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"
AHLP	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL"
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL"
AHQN	FIRST LEG WIDTH	1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"
AHQP	FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.650 INCHES NOMINAL"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.300 INCHES NOMINAL"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL"
AJZU	FIRST LEG STYLE	CORNER RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
AKBU	SECOND LEG STYLE	CORNER RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	80.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	PRIMER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"
ACHY	MOUNTING HOLE TYPE	PLAIN"
ADLK	FIRST LEG LENGTH	0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"
AHLF	SECOND LEG WIDTH	1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"
AHLG	SECOND LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHLK	FIRST LEG HOLE DIAMETER	0.1645 INCHES MINIMUM AND 0.1675 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"
AHLP	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL"
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL"
AHQN	FIRST LEG WIDTH	1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"
AHQP	FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL"
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.650 INCHES NOMINAL"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.300 INCHES NOMINAL"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL"
AJZU	FIRST LEG STYLE	CORNER RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
AKBU	SECOND LEG STYLE	CORNER RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	80.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	PRIMER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"

MRC

Criteria

Characteristic

ACHY

MOUNTING HOLE TYPE

PLAIN"

ADLK

FIRST LEG LENGTH

0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"

AHLF

SECOND LEG WIDTH

1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"

AHLG

SECOND LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHLK

FIRST LEG HOLE DIAMETER

0.1645 INCHES MINIMUM AND 0.1675 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"

AHLP

SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.050 INCHES NOMINAL"

AHPX

SECOND LEG THICKNESS

0.050 INCHES NOMINAL"

AHQN

FIRST LEG WIDTH

1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"

AHQP

FIRST LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHQU

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.650 INCHES NOMINAL"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.300 INCHES NOMINAL"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.300 INCHES NOMINAL"

AJZU

FIRST LEG STYLE

CORNER RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

AKBU

SECOND LEG STYLE

CORNER RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

80.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

PRIMER"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

ACHY

MOUNTING HOLE TYPE

PLAIN"

ADLK

FIRST LEG LENGTH

0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"

AHLF

SECOND LEG WIDTH

1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"

AHLG

SECOND LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHLK

FIRST LEG HOLE DIAMETER

0.1645 INCHES MINIMUM AND 0.1675 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"

AHLP

SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.050 INCHES NOMINAL"

AHPX

SECOND LEG THICKNESS

0.050 INCHES NOMINAL"

AHQN

FIRST LEG WIDTH

1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM"

AHQP

FIRST LEG CORNER RADIUS

0.250 INCHES NOMINAL"

AHQU

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.650 INCHES NOMINAL"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.300 INCHES NOMINAL"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.300 INCHES NOMINAL"

AJZU

FIRST LEG STYLE

CORNER RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

AKBU

SECOND LEG STYLE

CORNER RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

80.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

PRIMER"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

NSN 5340-01-279-5807 (5340012795807) Bracket Angle Parts Catalog

Manufacturer’s List for NSN 5340-01-279-5807

Part Number's List for NSN 5340-01-279-5807

Technical Characteristics of NSN 5340012795807

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts