NSN 5340-01-163-4328 (5340011634328) Bracket Angle Parts Catalog

The part belongs to NSN 5340-01-163-4328 is an Bracket Angle produced by United Technologies, Spartan Aerospace Llc, Royal Oak Gage Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-01-163-4328 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Angle made by United Technologies, Spartan Aerospace Llc, Royal Oak Gage Inc that carries the NSN 5340-01-163-4328, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340011634328 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM"
AGAV	END ITEM IDENTIFICATION	2TF33 ENGINE; W/S: ENGINE, AIRCRAFT, TF-33-P-7 (C-141 A/B); AIRCRAFT, STRATOFORTRESS B-52; ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, AWACS. E"
AHLF	SECOND LEG WIDTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"
AHPX	SECOND LEG THICKNESS	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"
AHQN	FIRST LEG WIDTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AJFP	FIRST LEG END RADIUS	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"
AJFQ	SECOND LEG END RADIUS	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	END RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
AKBU	SECOND LEG STYLE	END RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	STEEL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"
ADLK	FIRST LEG LENGTH	0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM"
AGAV	END ITEM IDENTIFICATION	2TF33 ENGINE; W/S: ENGINE, AIRCRAFT, TF-33-P-7 (C-141 A/B); AIRCRAFT, STRATOFORTRESS B-52; ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, AWACS. E"
AHLF	SECOND LEG WIDTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"
AHPX	SECOND LEG THICKNESS	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"
AHQN	FIRST LEG WIDTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AJFP	FIRST LEG END RADIUS	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"
AJFQ	SECOND LEG END RADIUS	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	END RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
AKBU	SECOND LEG STYLE	END RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	STEEL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"

MRC

Criteria

Characteristic

ADLK

FIRST LEG LENGTH

0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM"

AGAV

END ITEM IDENTIFICATION

2TF33 ENGINE; W/S: ENGINE, AIRCRAFT, TF-33-P-7 (C-141 A/B); AIRCRAFT, STRATOFORTRESS B-52; ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, AWACS. E"

AHLF

SECOND LEG WIDTH

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"

AHPX

SECOND LEG THICKNESS

0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"

AHQN

FIRST LEG WIDTH

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AJFP

FIRST LEG END RADIUS

0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"

AJFQ

SECOND LEG END RADIUS

0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

END RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

AKBU

SECOND LEG STYLE

END RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

STEEL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

ADLK

FIRST LEG LENGTH

0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM"

AGAV

END ITEM IDENTIFICATION

AHLF

SECOND LEG WIDTH

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"

AHPX

SECOND LEG THICKNESS

0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM"

AHQN

FIRST LEG WIDTH

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AJFP

FIRST LEG END RADIUS

0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"

AJFQ

SECOND LEG END RADIUS

0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

END RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

AKBU

SECOND LEG STYLE

END RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

STEEL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

NSN 5340-01-163-4328 (5340011634328) Bracket Angle Parts Catalog

Manufacturer’s List for NSN 5340-01-163-4328

Part Number's List for NSN 5340-01-163-4328

Technical Characteristics of NSN 5340011634328

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts