NSN 5340-01-102-8508 (5340011028508) Bracket Angle Parts Catalog

The part belongs to NSN 5340-01-102-8508 is an Bracket Angle produced by Paeaeesikunta Logistiikkaosasto, Boeing Company, Trico Manufacturing Inc, Fastener Specialty Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-01-102-8508 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Angle made by Paeaeesikunta Logistiikkaosasto, Boeing Company, Trico Manufacturing Inc, Fastener Specialty Inc that carries the NSN 5340-01-102-8508, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340011028508 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL"
ADLL	SECOND LEG LENGTH	0.750 INCHES NOMINAL"
AHLF	SECOND LEG WIDTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"
AHLG	SECOND LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL"
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL"
AHQN	FIRST LEG WIDTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"
AHQP	FIRST LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	CORNER RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
AKBU	SECOND LEG STYLE	CORNER RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	PAINT"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"
ADLK	FIRST LEG LENGTH	0.750 INCHES NOMINAL"
ADLL	SECOND LEG LENGTH	0.750 INCHES NOMINAL"
AHLF	SECOND LEG WIDTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"
AHLG	SECOND LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL"
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL"
AHQN	FIRST LEG WIDTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"
AHQP	FIRST LEG CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	CORNER RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
AKBU	SECOND LEG STYLE	CORNER RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	PAINT"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"

MRC

Criteria

Characteristic

ADLK

FIRST LEG LENGTH

0.750 INCHES NOMINAL"

ADLL

SECOND LEG LENGTH

0.750 INCHES NOMINAL"

AHLF

SECOND LEG WIDTH

0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"

AHLG

SECOND LEG CORNER RADIUS

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.050 INCHES NOMINAL"

AHPX

SECOND LEG THICKNESS

0.050 INCHES NOMINAL"

AHQN

FIRST LEG WIDTH

0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"

AHQP

FIRST LEG CORNER RADIUS

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AHQU

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

CORNER RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

AKBU

SECOND LEG STYLE

CORNER RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

PAINT"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

ADLK

FIRST LEG LENGTH

0.750 INCHES NOMINAL"

ADLL

SECOND LEG LENGTH

0.750 INCHES NOMINAL"

AHLF

SECOND LEG WIDTH

0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"

AHLG

SECOND LEG CORNER RADIUS

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.050 INCHES NOMINAL"

AHPX

SECOND LEG THICKNESS

0.050 INCHES NOMINAL"

AHQN

FIRST LEG WIDTH

0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM"

AHQP

FIRST LEG CORNER RADIUS

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AHQU

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

CORNER RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

AKBU

SECOND LEG STYLE

CORNER RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

TWO HOLES"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,T81 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

PAINT"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

NSN 5340-01-102-8508 (5340011028508) Bracket Angle Parts Catalog

Manufacturer’s List for NSN 5340-01-102-8508

Part Number's List for NSN 5340-01-102-8508

Technical Characteristics of NSN 5340011028508

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts