NSN 5340-00-920-7761 (5340009207761) Bracket Double Angle Parts Catalog

The part belongs to NSN 5340-00-920-7761 is an Bracket Double Angle produced by United Technologies, Tokyo Judogi Kogyo Co, Rogerson Kratos, Atomic Energy Of Canada Ltd. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-00-920-7761 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Double Angle made by United Technologies, Tokyo Judogi Kogyo Co, Rogerson Kratos, Atomic Energy Of Canada Ltd that carries the NSN 5340-00-920-7761, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340009207761 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AARN	FABRICATION METHOD (NON-CORE)	FORMED"
ADLK	FIRST LEG LENGTH	1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"
AHLF	SECOND LEG WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"
AHPX	SECOND LEG THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"
AHPZ	CENTER SECTION HEIGHT	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM"
AHQA	CENTER SECTION WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"
AHQB	CENTER SECTION THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"
AHQN	FIRST LEG WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AJFP	FIRST LEG END RADIUS	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AJFQ	SECOND LEG END RADIUS	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	END RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
AKBU	SECOND LEG STYLE	END RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	STEEL COMP 410"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"
STYL	STYLE DESIGNATOR	DOUBLE ANGLE"
AARN	FABRICATION METHOD (NON-CORE)	FORMED"
ADLK	FIRST LEG LENGTH	1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"
AHLF	SECOND LEG WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"
AHPX	SECOND LEG THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"
AHPZ	CENTER SECTION HEIGHT	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM"
AHQA	CENTER SECTION WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"
AHQB	CENTER SECTION THICKNESS	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"
AHQN	FIRST LEG WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AJFP	FIRST LEG END RADIUS	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AJFQ	SECOND LEG END RADIUS	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	END RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
AKBU	SECOND LEG STYLE	END RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	STEEL COMP 410"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"
STYL	STYLE DESIGNATOR	DOUBLE ANGLE"

MRC

Criteria

Characteristic

AARN

FABRICATION METHOD (NON-CORE)

FORMED"

ADLK

FIRST LEG LENGTH

1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"

AHLF

SECOND LEG WIDTH

0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"

AHPX

SECOND LEG THICKNESS

0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"

AHPZ

CENTER SECTION HEIGHT

1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM"

AHQA

CENTER SECTION WIDTH

0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"

AHQB

CENTER SECTION THICKNESS

0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"

AHQN

FIRST LEG WIDTH

0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AJFP

FIRST LEG END RADIUS

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AJFQ

SECOND LEG END RADIUS

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

END RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

AKBU

SECOND LEG STYLE

END RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

CSSR

SECOND LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

STEEL COMP 410"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"

STYL

STYLE DESIGNATOR

DOUBLE ANGLE"

AARN

FABRICATION METHOD (NON-CORE)

FORMED"

ADLK

FIRST LEG LENGTH

1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM"

AHLF

SECOND LEG WIDTH

0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"

AHPX

SECOND LEG THICKNESS

0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"

AHPZ

CENTER SECTION HEIGHT

1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM"

AHQA

CENTER SECTION WIDTH

0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"

AHQB

CENTER SECTION THICKNESS

0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM"

AHQN

FIRST LEG WIDTH

0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AJFP

FIRST LEG END RADIUS

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AJFQ

SECOND LEG END RADIUS

0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

END RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

AKBU

SECOND LEG STYLE

END RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

NOT IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

CSSR

SECOND LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

STEEL COMP 410"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE"

STYL

STYLE DESIGNATOR

DOUBLE ANGLE"

NSN 5340-00-920-7761 (5340009207761) Bracket Double Angle Parts Catalog

Manufacturer’s List for NSN 5340-00-920-7761

Part Number's List for NSN 5340-00-920-7761

Technical Characteristics of NSN 5340009207761

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts