NSN 5340-00-800-4129 (5340008004129) Bracket Angle Parts Catalog

The part belongs to NSN 5340-00-800-4129 is an Bracket Angle produced by Society Of Automotiv, Sae, Aeronautical Standards Group. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5340-00-800-4129 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bracket Angle made by Society Of Automotiv, Sae, Aeronautical Standards Group that carries the NSN 5340-00-800-4129, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5340008004129 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM"
AFPW	REINFORCEMENT METHOD (NON-CORE)	BEADED BOTH SIDES"
AHLF	SECOND LEG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"
AHPX	SECOND LEG THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"
AHQN	FIRST LEG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AJFP	FIRST LEG END RADIUS	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AJFQ	SECOND LEG END RADIUS	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	END RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
AKBU	SECOND LEG STYLE	END RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	ANODIZE"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"
ADLK	FIRST LEG LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM"
ADLL	SECOND LEG LENGTH	0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM"
AFPW	REINFORCEMENT METHOD (NON-CORE)	BEADED BOTH SIDES"
AHLF	SECOND LEG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHLK	FIRST LEG HOLE DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"
AHLN	SECOND LEG HOLE DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHPW	FIRST LEG THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"
AHPX	SECOND LEG THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"
AHQN	FIRST LEG WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"
AJFP	FIRST LEG END RADIUS	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AJFQ	SECOND LEG END RADIUS	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"
AJZU	FIRST LEG STYLE	END RADIUS"
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
AKBU	SECOND LEG STYLE	END RADIUS"
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE"
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	IDENTICAL"
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL"
MATT	MATERIAL	ALUMINUM ALLOY 2024"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE"
SFTT	SURFACE TREATMENT	ANODIZE"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE"
STYL	STYLE DESIGNATOR	ANGLE"

MRC

Criteria

Characteristic

ADLK

FIRST LEG LENGTH

0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM"

AFPW

REINFORCEMENT METHOD (NON-CORE)

BEADED BOTH SIDES"

AHLF

SECOND LEG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"

AHPX

SECOND LEG THICKNESS

0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"

AHQN

FIRST LEG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AJFP

FIRST LEG END RADIUS

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AJFQ

SECOND LEG END RADIUS

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

END RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

AKBU

SECOND LEG STYLE

END RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

ANODIZE"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

ADLK

FIRST LEG LENGTH

0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM"

ADLL

SECOND LEG LENGTH

0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM"

AFPW

REINFORCEMENT METHOD (NON-CORE)

BEADED BOTH SIDES"

AHLF

SECOND LEG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHLK

FIRST LEG HOLE DIAMETER

0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"

AHLN

SECOND LEG HOLE DIAMETER

0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM"

AHLV

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHLW

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHPW

FIRST LEG THICKNESS

0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"

AHPX

SECOND LEG THICKNESS

0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM"

AHQN

FIRST LEG WIDTH

0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM"

AHRA

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AHRB

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH

0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM"

AJFP

FIRST LEG END RADIUS

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AJFQ

SECOND LEG END RADIUS

0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM"

AJZU

FIRST LEG STYLE

END RADIUS"

AKAU

FIRST LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

AKBU

SECOND LEG STYLE

END RADIUS"

AKCU

SECOND LEG HOLE ARRANGEMENT STYLE

ONE HOLE"

CSSP

SECOND LEG RELATIONSHIP TO FIRST LEG

IDENTICAL"

CSSQ

FIRST LEG ANGLE

90.0 DEGREES NOMINAL"

MATT

MATERIAL

ALUMINUM ALLOY 2024"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE"

SFTT

SURFACE TREATMENT

ANODIZE"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE"

STYL

STYLE DESIGNATOR

ANGLE"

NSN 5340-00-800-4129 (5340008004129) Bracket Angle Parts Catalog

Manufacturer’s List for NSN 5340-00-800-4129

Part Number's List for NSN 5340-00-800-4129

Technical Characteristics of NSN 5340008004129

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts