NSN 5315-01-483-0265 (5315014830265) Pin Straight Headless Parts Catalog

The part belongs to NSN 5315-01-483-0265 is an Pin Straight Headless produced by Sweeney Engineering Corp. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5315-01-483-0265 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Pin Straight Headless made by Sweeney Engineering Corp that carries the NSN 5315-01-483-0265, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5315014830265 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	COUNTERBORED W/O THRU HOLE
AAHP	SECOND END STYLE	SLOTTED
ACHT	PIN OVERALL LENGTH	1.849 INCHES NOMINAL
ACHU	PIN OVERALL DIAMETER	0.7160 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	AIRCRAFT, HORNET, F/A-18
AKTN	SECOND END SLOT WIDTH	0.100 INCHES NOMINAL
AKTX	FIRST END COUNTERBORE DIAMETER	0.529 INCHES NOMINAL
AKTZ	FIRST END COUNTERBORE DEPTH	0.390 INCHES NOMINAL
AMGR	SECOND END SLOT DEPTH	1.459 INCHES NOMINAL
CQBB	SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
CTTF	SECOND END OUTER RADIUS	0.008 INCHES MINIMUM AND 0.015 INCHES MAXIMUM
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	PLUNGER
FEAT	SPECIAL FEATURES	STYLE VERY UNIQUE;CHAMFERED TIP IS CUT AT A 30 DEGREE ANGLE AND THE END IS CUT AT .100 DIAMER WITH A SLOT ALL THE WAY THROUGH THE ITEM UNTIL IT MEETS THE OPEN END;OPEN END HAS A THRU SLOT 0.041 X .188, EXTERNALLY THREADED END .500 UN 3A
MATT	MATERIAL	STEEL COMP 1215 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CHROMIUM OVERALL AND NICKEL OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-N-290,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL AND QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AAGZ	FIRST END STYLE	COUNTERBORED W/O THRU HOLE
AAHP	SECOND END STYLE	SLOTTED
ACHT	PIN OVERALL LENGTH	1.849 INCHES NOMINAL
ACHU	PIN OVERALL DIAMETER	0.7160 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	AIRCRAFT, HORNET, F/A-18
AKTN	SECOND END SLOT WIDTH	0.100 INCHES NOMINAL
AKTX	FIRST END COUNTERBORE DIAMETER	0.529 INCHES NOMINAL
AKTZ	FIRST END COUNTERBORE DEPTH	0.390 INCHES NOMINAL
AMGR	SECOND END SLOT DEPTH	1.459 INCHES NOMINAL
CQBB	SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
CTTF	SECOND END OUTER RADIUS	0.008 INCHES MINIMUM AND 0.015 INCHES MAXIMUM
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	PLUNGER
FEAT	SPECIAL FEATURES	STYLE VERY UNIQUE;CHAMFERED TIP IS CUT AT A 30 DEGREE ANGLE AND THE END IS CUT AT .100 DIAMER WITH A SLOT ALL THE WAY THROUGH THE ITEM UNTIL IT MEETS THE OPEN END;OPEN END HAS A THRU SLOT 0.041 X .188, EXTERNALLY THREADED END .500 UN 3A
MATT	MATERIAL	STEEL COMP 1215 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CHROMIUM OVERALL AND NICKEL OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-N-290,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL AND QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

MRC

Criteria

Characteristic

AAGZ

FIRST END STYLE

COUNTERBORED W/O THRU HOLE

AAHP

SECOND END STYLE

SLOTTED

ACHT

PIN OVERALL LENGTH

1.849 INCHES NOMINAL

ACHU

PIN OVERALL DIAMETER

0.7160 INCHES NOMINAL

AGAV

END ITEM IDENTIFICATION

AIRCRAFT, HORNET, F/A-18

AKTN

SECOND END SLOT WIDTH

0.100 INCHES NOMINAL

AKTX

FIRST END COUNTERBORE DIAMETER

0.529 INCHES NOMINAL

AKTZ

FIRST END COUNTERBORE DEPTH

0.390 INCHES NOMINAL

AMGR

SECOND END SLOT DEPTH

1.459 INCHES NOMINAL

CQBB

SECOND END RELATIONSHIP WITH FIRST END

NOT IDENTICAL

CTTF

SECOND END OUTER RADIUS

0.008 INCHES MINIMUM AND 0.015 INCHES MAXIMUM

CXCY

PART NAME ASSIGNED BY CONTROLLING AGENCY

PLUNGER

FEAT

SPECIAL FEATURES

STYLE VERY UNIQUE;CHAMFERED TIP IS CUT AT A 30 DEGREE ANGLE AND THE END IS CUT AT .100 DIAMER WITH A SLOT ALL THE WAY THROUGH THE ITEM UNTIL IT MEETS THE OPEN END;OPEN END HAS A THRU SLOT 0.041 X .188, EXTERNALLY THREADED END .500 UN 3A

MATT

MATERIAL

STEEL COMP 1215 OVERALL

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

SFTT

SURFACE TREATMENT

CHROMIUM OVERALL AND NICKEL OVERALL

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-N-290,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL AND QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL