NSN 5315-00-001-9480 (5315000019480) Pin Grooved Headless Parts Catalog

The part belongs to NSN 5315-00-001-9480 is an Pin Grooved Headless produced by Navair Ltd. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5315-00-001-9480 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Pin Grooved Headless made by Navair Ltd that carries the NSN 5315-00-001-9480, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5315000019480 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	CHAMFERED W/THRU HOLE"
ABHP	OVERALL LENGTH	2.500 INCHES NOMINAL"
ABMZ	DIAMETER	0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM"
ABNZ	EFFECTIVE LENGTH	2.250 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM"
ABPC	UNDERCUT WIDTH	0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"
AMCS	FIRST END TAPER LENGTH	0.016 INCHES NOMINAL"
CQBB	SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL"
CQFM	HARDNESS RATING	30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL"
CRDY	FIRST END LOCATION	BOTH ENDS"
CRMG	FIRST END TAPER ANGLE	10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM"
CSYM	SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER"
FEAT	SPECIAL FEATURES	0.316 IN. DIA THRU HOLE THD ON GROOVED END 5/16-18 UNC 2B 0.595 IN. MIN 0.655 IN. MAX LG,WITH RETAINING RING"
MATT	MATERIAL	STEEL COMP 4130H OVERALL"
SFTT	SURFACE TREATMENT	PHOSPHATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL"
STYL	STYLE DESIGNATOR	GROOVE"
AAGZ	FIRST END STYLE	CHAMFERED W/THRU HOLE"
ABHP	OVERALL LENGTH	2.500 INCHES NOMINAL"
ABMZ	DIAMETER	0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM"
ABNZ	EFFECTIVE LENGTH	2.250 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM"
ABPC	UNDERCUT WIDTH	0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"
AMCS	FIRST END TAPER LENGTH	0.016 INCHES NOMINAL"
CQBB	SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL"
CQFM	HARDNESS RATING	30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL"
CRDY	FIRST END LOCATION	BOTH ENDS"
CRMG	FIRST END TAPER ANGLE	10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM"
CSYM	SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER"
FEAT	SPECIAL FEATURES	0.316 IN. DIA THRU HOLE THD ON GROOVED END 5/16-18 UNC 2B 0.595 IN. MIN 0.655 IN. MAX LG,WITH RETAINING RING"
MATT	MATERIAL	STEEL COMP 4130H OVERALL"
SFTT	SURFACE TREATMENT	PHOSPHATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL"
STYL	STYLE DESIGNATOR	GROOVE"

MRC

Criteria

Characteristic

AAGZ

FIRST END STYLE

CHAMFERED W/THRU HOLE"

ABHP

OVERALL LENGTH

2.500 INCHES NOMINAL"

ABMZ

DIAMETER

0.7501 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM"

ABNZ

EFFECTIVE LENGTH

2.250 INCHES NOMINAL"

ABPA

UNDERCUT DIAMETER

0.617 INCHES MINIMUM AND 0.618 INCHES MAXIMUM"

ABPC

UNDERCUT WIDTH

0.076 INCHES MINIMUM AND 0.080 INCHES MAXIMUM"

AMCS

FIRST END TAPER LENGTH

0.016 INCHES NOMINAL"

CQBB

SECOND END RELATIONSHIP WITH FIRST END

IDENTICAL"

CQFM

HARDNESS RATING

30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL"

CRDY

FIRST END LOCATION

BOTH ENDS"

CRMG

FIRST END TAPER ANGLE

10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM"

CSYM

SURFACE FINISH

32.0 MICROINCHES OUTSIDE DIAMETER"

FEAT

SPECIAL FEATURES

0.316 IN. DIA THRU HOLE THD ON GROOVED END 5/16-18 UNC 2B 0.595 IN. MIN 0.655 IN. MAX LG,WITH RETAINING RING"

MATT

MATERIAL

STEEL COMP 4130H OVERALL"

SFTT

SURFACE TREATMENT

PHOSPHATE OVERALL"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL"

STYL

STYLE DESIGNATOR

GROOVE"