NSN 5306-01-209-7862 (5306012097862) Bolt Shoulder Parts Catalog

The part belongs to NSN 5306-01-209-7862 is an Bolt Shoulder produced by Alcoa Global Fasteners Inc, Valley Todeco Inc, Reid Products Inc, Boeing Company, Sonic Industries Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5306-01-209-7862 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bolt Shoulder made by Alcoa Global Fasteners Inc, Valley Todeco Inc, Reid Products Inc, Boeing Company, Sonic Industries Inc that carries the NSN 5306-01-209-7862, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5306012097862 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM"
AASB	FASTENER LENGTH	0.578 INCHES MINIMUM AND 0.608 INCHES MAXIMUM"
AASK	HEAD STYLE	DOUBLE HEXAGON W/HOLE"
AASU	HEAD HEIGHT	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AATB	WIDTH BETWEEN FLATS	0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM"
AATC	EXTENDED WASHER DIAMETER	0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM"
AATD	EXTENDED WASHER THICKNESS	0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM"
AATN	SHOULDER DIAMETER	0.2802 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER"
AATX	SHOULDER LENGTH	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM FIRST SHOULDER"
AAUB	HOLE DIAMETER	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE"
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES"
ASXK	HOLE QUANTITY	4"
BQDM	HOLE TYPE	DRILLED"
CMLP	THREAD QUANTITY PER INCH	28"
CQBC	MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH"
CRHC	HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.386 INCHES MINIMUM AND 0.426 INCHES MAXIMUM FIRST HOLE"
CWYB	SHOULDER SHAPE	ROUND FIRST SHOULDER"
MATT	MATERIAL	STEEL COMP XM-13 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM"
AASB	FASTENER LENGTH	0.578 INCHES MINIMUM AND 0.608 INCHES MAXIMUM"
AASK	HEAD STYLE	DOUBLE HEXAGON W/HOLE"
AASU	HEAD HEIGHT	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"
AATB	WIDTH BETWEEN FLATS	0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM"
AATC	EXTENDED WASHER DIAMETER	0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM"
AATD	EXTENDED WASHER THICKNESS	0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM"
AATN	SHOULDER DIAMETER	0.2802 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER"
AATX	SHOULDER LENGTH	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM FIRST SHOULDER"
AAUB	HOLE DIAMETER	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE"
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES"
ASXK	HOLE QUANTITY	4"
BQDM	HOLE TYPE	DRILLED"
CMLP	THREAD QUANTITY PER INCH	28"
CQBC	MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH"
CRHC	HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.386 INCHES MINIMUM AND 0.426 INCHES MAXIMUM FIRST HOLE"
CWYB	SHOULDER SHAPE	ROUND FIRST SHOULDER"
MATT	MATERIAL	STEEL COMP XM-13 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3A"

AAJF

THREAD DIRECTION

RIGHT-HAND"

AASA

THREAD LENGTH

0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM"

AASB

FASTENER LENGTH

0.578 INCHES MINIMUM AND 0.608 INCHES MAXIMUM"

AASK

HEAD STYLE

DOUBLE HEXAGON W/HOLE"

AASU

HEAD HEIGHT

0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM"

AATB

WIDTH BETWEEN FLATS

0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM"

AATC

EXTENDED WASHER DIAMETER

0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM"

AATD

EXTENDED WASHER THICKNESS

0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM"

AATN

SHOULDER DIAMETER

0.2802 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER"

AATX

SHOULDER LENGTH

0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM FIRST SHOULDER"

AAUB

HOLE DIAMETER

0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM"

AAWB

SHANK UNTHREADED HOLE DIAMETER

0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE"

AHYM

NOMINAL THREAD DIAMETER

0.250 INCHES"

ASXK

HOLE QUANTITY

BQDM

HOLE TYPE

DRILLED"

CMLP

THREAD QUANTITY PER INCH

28"

CQBC

MINIMUM TENSILE STRENGTH

220000 POUNDS PER SQUARE INCH"

CRHC

HOLE CONFIGURATION STYLE

DOUBLE HEXAGON LONGITUDINAL HOLE"

CRZS

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER

0.386 INCHES MINIMUM AND 0.426 INCHES MAXIMUM FIRST HOLE"

CWYB

SHOULDER SHAPE

ROUND FIRST SHOULDER"

MATT

MATERIAL

STEEL COMP XM-13 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"

SFTT

SURFACE TREATMENT

PASSIVATE OVERALL"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"

THSD

THREAD SERIES DESIGNATOR

UNJF"