Search By:
Thanks for Visiting Us At ASAP AOG!

Thanks for Visiting Us At ASAP AOG! Before You Go, Why Not Take a Look at Our Aircraft Parts Catalog? You Can Get One of the Most Competitive Quotes On the Market In 15 Minutes Or Less.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

NSN 5306-01-198-8060 (5306011988060) Bolt Eye Parts Catalog

The part belongs to NSN 5306-01-198-8060 is an Bolt Eye produced by Raytheon Technical Services, Raytheon Co, Carr Lane Mfg Co. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5306-01-198-8060 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bolt Eye made by Raytheon Technical Services, Raytheon Co, Carr Lane Mfg Co that carries the NSN 5306-01-198-8060, you can rely on us to provide you with the necessary parts from our available inventory.


At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5306011988060 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.


Alternative NSN: 5306-01-198-8060
Item Name: Bolt Eye
FSG: 53 Hardware and Abrasives
Federal Supply Class (FSC): 5306 Bolts
NCB Code: USA (01)
Manufacturers: Carr Lane Mfg Co, Raytheon Co, Raytheon Technical Services

Manufacturer’s List for NSN 5306-01-198-8060

carr lane mfg co raytheon co raytheon technical services

Part Number's List for NSN 5306-01-198-8060

Part No.
Manufacturer
Item Name
Availability
RFQ
Bolt Eye
YES
RFQ

Technical Characteristics of NSN 5306011988060

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH2.280 INCHES MINIMUM
AATKEYE INSIDE DIAMETER0.312 INCHES MINIMUM AND 0.314 INCHES MAXIMUM
AATRSHANK LENGTH5.445 INCHES MINIMUM
AATZEYE STOCK DIAMETER0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.094 INCHES MINIMUM FIRST HOLE AND 0.097 INCHES MAXIMUM FIRST HOLE
ABHPOVERALL LENGTH6.195 INCHES NOMINAL
AHYMNOMINAL THREAD DIAMETER0.375 INCHES
CMLPTHREAD QUANTITY PER INCH16
CQBCMINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING28.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
CRHTDISTANCE FROM CENTER OF EYE TO SHANK END5.820 INCHES NOMINAL
CTWFDISTANCE FROM THREADED END TO SHANK HOLE CENTER3.440 INCHES NOMINAL FIRST HOLE
FEATSPECIAL FEATURESDRY FILM LUBE PER MIL-L-8937
MATTMATERIALSTEEL OVERALL
SFTTSURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLSTYLE DESIGNATORROUND, CLOSED
THSDTHREAD SERIES DESIGNATORUNC