NSN 5306-01-026-5775 (5306010265775) Bolt Shear Parts Catalog

The part belongs to NSN 5306-01-026-5775 is an Bolt Shear produced by Sps Technologies Inc. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5306-01-026-5775 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bolt Shear made by Sps Technologies Inc that carries the NSN 5306-01-026-5775, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5306010265775 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM"
AASB	FASTENER LENGTH	3.610 INCHES MINIMUM AND 3.640 INCHES MAXIMUM"
AASK	HEAD STYLE	DOUBLE HEXAGON W/HOLE"
AASU	HEAD HEIGHT	0.673 INCHES NOMINAL"
AATB	WIDTH BETWEEN FLATS	0.803 INCHES MINIMUM AND 0.814 INCHES MAXIMUM"
AATC	EXTENDED WASHER DIAMETER	1.185 INCHES MINIMUM AND 1.195 INCHES MAXIMUM"
AATD	EXTENDED WASHER THICKNESS	0.125 INCHES NOMINAL"
AAUB	HOLE DIAMETER	0.055 INCHES NOMINAL"
AAUR	GRIP DIAMETER	0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM"
AHYM	NOMINAL THREAD DIAMETER	0.625 INCHES"
ANEE	GRIP LENGTH	2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM"
ASXK	HOLE QUANTITY	4"
BQDM	HOLE TYPE	DRILLED"
CMLP	THREAD QUANTITY PER INCH	18"
CQBC	MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH"
CQFM	HARDNESS RATING	322.0 BRINELL STANDARD MINIMUM OVERALL AND 363.0 BRINELL STANDARD MAXIMUM OVERALL"
CRHC	HOLE CONFIGURATION STYLE	HEXAGON LONGITUDINAL HOLE"
MATT	MATERIAL	STEEL COMP 1335 OVERALL OR STEEL COMP 1340 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 8637 OVERALL OR STEEL COMP 8640 OVERALL OR STEEL COMP 8740 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	ZINC OVERALL OR CADMIUM OVERALL AND CHROMATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-Z-325,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-P-416,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM"
AASB	FASTENER LENGTH	3.610 INCHES MINIMUM AND 3.640 INCHES MAXIMUM"
AASK	HEAD STYLE	DOUBLE HEXAGON W/HOLE"
AASU	HEAD HEIGHT	0.673 INCHES NOMINAL"
AATB	WIDTH BETWEEN FLATS	0.803 INCHES MINIMUM AND 0.814 INCHES MAXIMUM"
AATC	EXTENDED WASHER DIAMETER	1.185 INCHES MINIMUM AND 1.195 INCHES MAXIMUM"
AATD	EXTENDED WASHER THICKNESS	0.125 INCHES NOMINAL"
AAUB	HOLE DIAMETER	0.055 INCHES NOMINAL"
AAUR	GRIP DIAMETER	0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM"
AHYM	NOMINAL THREAD DIAMETER	0.625 INCHES"
ANEE	GRIP LENGTH	2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM"
ASXK	HOLE QUANTITY	4"
BQDM	HOLE TYPE	DRILLED"
CMLP	THREAD QUANTITY PER INCH	18"
CQBC	MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH"
CQFM	HARDNESS RATING	322.0 BRINELL STANDARD MINIMUM OVERALL AND 363.0 BRINELL STANDARD MAXIMUM OVERALL"
CRHC	HOLE CONFIGURATION STYLE	HEXAGON LONGITUDINAL HOLE"
MATT	MATERIAL	STEEL COMP 1335 OVERALL OR STEEL COMP 1340 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 8637 OVERALL OR STEEL COMP 8640 OVERALL OR STEEL COMP 8740 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	ZINC OVERALL OR CADMIUM OVERALL AND CHROMATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-Z-325,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-P-416,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3A"

AAJF

THREAD DIRECTION

RIGHT-HAND"

AASA

THREAD LENGTH

1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM"

AASB

FASTENER LENGTH

3.610 INCHES MINIMUM AND 3.640 INCHES MAXIMUM"

AASK

HEAD STYLE

DOUBLE HEXAGON W/HOLE"

AASU

HEAD HEIGHT

0.673 INCHES NOMINAL"

AATB

WIDTH BETWEEN FLATS

0.803 INCHES MINIMUM AND 0.814 INCHES MAXIMUM"

AATC

EXTENDED WASHER DIAMETER

1.185 INCHES MINIMUM AND 1.195 INCHES MAXIMUM"

AATD

EXTENDED WASHER THICKNESS

0.125 INCHES NOMINAL"

AAUB

HOLE DIAMETER

0.055 INCHES NOMINAL"

AAUR

GRIP DIAMETER

0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM"

AHYM

NOMINAL THREAD DIAMETER

0.625 INCHES"

ANEE

GRIP LENGTH

2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM"

ASXK

HOLE QUANTITY

BQDM

HOLE TYPE

DRILLED"

CMLP

THREAD QUANTITY PER INCH

18"

CQBC

MINIMUM TENSILE STRENGTH

220000 POUNDS PER SQUARE INCH"

CQFM

HARDNESS RATING

322.0 BRINELL STANDARD MINIMUM OVERALL AND 363.0 BRINELL STANDARD MAXIMUM OVERALL"

CRHC

HOLE CONFIGURATION STYLE

HEXAGON LONGITUDINAL HOLE"

MATT

MATERIAL

STEEL COMP 1335 OVERALL OR STEEL COMP 1340 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 8637 OVERALL OR STEEL COMP 8640 OVERALL OR STEEL COMP 8740 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"

SFTT

SURFACE TREATMENT

ZINC OVERALL OR CADMIUM OVERALL AND CHROMATE OVERALL"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-Z-325,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-P-416,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL"

THSD

THREAD SERIES DESIGNATOR

UNJF"