NSN 5306-00-144-3864 (5306001443864) Bolt Clevis Parts Catalog

The part belongs to NSN 5306-00-144-3864 is an Bolt Clevis produced by Aeronautical Standards Group, Harvard Industries. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5306-00-144-3864 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Bolt Clevis made by Aeronautical Standards Group, Harvard Industries that carries the NSN 5306-00-144-3864, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5306001443864 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.339 INCHES MINIMUM AND 0.379 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.787 INCHES MINIMUM AND 1.807 INCHES MAXIMUM"
AASK	HEAD STYLE	BUTTON"
AASL	HEAD DIAMETER	0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM"
AAVZ	GROOVE DIAMETER	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE"
AAWU	SINGLE SHEAR STRENGTH	5750 POUNDS PER SQUARE INCH"
ABQZ	INTERNAL DRIVE STYLE	SLOT"
AHYM	NOMINAL THREAD DIAMETER	0.312 INCHES"
CMLP	THREAD QUANTITY PER INCH	24"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.611 INCHES MINIMUM FIRST HOLE AND 1.646 INCHES MAXIMUM FIRST HOLE"
MATT	MATERIAL	STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE"
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNF"
ZZZW	DEPARTURE FROM CITED DOCUMENT	THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.339 INCHES MINIMUM AND 0.379 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.787 INCHES MINIMUM AND 1.807 INCHES MAXIMUM"
AASK	HEAD STYLE	BUTTON"
AASL	HEAD DIAMETER	0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM"
AAVZ	GROOVE DIAMETER	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE"
AAWU	SINGLE SHEAR STRENGTH	5750 POUNDS PER SQUARE INCH"
ABQZ	INTERNAL DRIVE STYLE	SLOT"
AHYM	NOMINAL THREAD DIAMETER	0.312 INCHES"
CMLP	THREAD QUANTITY PER INCH	24"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.611 INCHES MINIMUM FIRST HOLE AND 1.646 INCHES MAXIMUM FIRST HOLE"
MATT	MATERIAL	STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE"
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNF"
ZZZW	DEPARTURE FROM CITED DOCUMENT	THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3A"

AAJF

THREAD DIRECTION

RIGHT-HAND"

AASA

THREAD LENGTH

0.339 INCHES MINIMUM AND 0.379 INCHES MAXIMUM"

AASB

FASTENER LENGTH

1.787 INCHES MINIMUM AND 1.807 INCHES MAXIMUM"

AASK

HEAD STYLE

BUTTON"

AASL

HEAD DIAMETER

0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM"

AASU

HEAD HEIGHT

0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM"

AAVZ

GROOVE DIAMETER

0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM"

AAWB

SHANK UNTHREADED HOLE DIAMETER

0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE"

AAWU

SINGLE SHEAR STRENGTH

5750 POUNDS PER SQUARE INCH"

ABQZ

INTERNAL DRIVE STYLE

SLOT"

AHYM

NOMINAL THREAD DIAMETER

0.312 INCHES"

CMLP

THREAD QUANTITY PER INCH

24"

CRZS

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER

1.611 INCHES MINIMUM FIRST HOLE AND 1.646 INCHES MAXIMUM FIRST HOLE"

MATT

MATERIAL

STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE"

SFTT

SURFACE TREATMENT

CADMIUM OVERALL AND CHROMATE OVERALL"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL"

THSD

THREAD SERIES DESIGNATOR

UNF"

ZZZW

DEPARTURE FROM CITED DOCUMENT

THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW SHANK BOLT DIA"