NSN 5305-01-502-4868 (5305015024868) Screw Close Tolerance Parts Catalog

The part belongs to NSN 5305-01-502-4868 is an Screw Close Tolerance produced by Lisi Aerospace Canada Corp, Hi Shear Corp, Sps Technologies Inc, Alcoa Global Fasteners Inc, Alcoa Fastening Systems Fairchild. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5305-01-502-4868 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Screw Close Tolerance made by Lisi Aerospace Canada Corp, Hi Shear Corp, Sps Technologies Inc, Alcoa Global Fasteners Inc, Alcoa Fastening Systems Fairchild that carries the NSN 5305-01-502-4868, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5305015024868 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.345 INCHES NOMINAL"
AASB	FASTENER LENGTH	1.205 INCHES MINIMUM AND 1.235 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK"
AASL	HEAD DIAMETER	0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM"
AAUH	SPLINE MINOR DIAMETER	0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM"
AAUJ	SPLINE MAJOR DIAMETER	0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES NOMINAL THREADS"
ABQJ	POINT STYLE	FLAT"
ABQZ	INTERNAL DRIVE STYLE	TORX"
AGAV	END ITEM IDENTIFICATION	F18 E/F"
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES"
ANEE	GRIP LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	32"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.114 INCHES MINIMUM THREADS AND 1.134 INCHES MAXIMUM THREADS"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS"
FEAT	SPECIAL FEATURES	N125 KSI SHEAR STRENGTH; FINISH - ALUMINUM PER MIL-C-83488, TYPE II, CLASS III PULS CETYL ALCOHOL PER MIL-L-87132, TYPE 1, GRADE B; INTENDED FOR USE IN ALUMINUM STRUCTURE WHERE APPLIED SEALANT WOULD NOT BE SUITABLE"
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.345 INCHES NOMINAL"
AASB	FASTENER LENGTH	1.205 INCHES MINIMUM AND 1.235 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK"
AASL	HEAD DIAMETER	0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM"
AAUH	SPLINE MINOR DIAMETER	0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM"
AAUJ	SPLINE MAJOR DIAMETER	0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES NOMINAL THREADS"
ABQJ	POINT STYLE	FLAT"
ABQZ	INTERNAL DRIVE STYLE	TORX"
AGAV	END ITEM IDENTIFICATION	F18 E/F"
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES"
ANEE	GRIP LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	32"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.114 INCHES MINIMUM THREADS AND 1.134 INCHES MAXIMUM THREADS"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS"
FEAT	SPECIAL FEATURES	N125 KSI SHEAR STRENGTH; FINISH - ALUMINUM PER MIL-C-83488, TYPE II, CLASS III PULS CETYL ALCOHOL PER MIL-L-87132, TYPE 1, GRADE B; INTENDED FOR USE IN ALUMINUM STRUCTURE WHERE APPLIED SEALANT WOULD NOT BE SUITABLE"
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3A"

AAJF

THREAD DIRECTION

RIGHT-HAND"

AASA

THREAD LENGTH

0.345 INCHES NOMINAL"

AASB

FASTENER LENGTH

1.205 INCHES MINIMUM AND 1.235 INCHES MAXIMUM"

AASK

HEAD STYLE

FLAT COUNTERSUNK"

AASL

HEAD DIAMETER

0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM"

AAUH

SPLINE MINOR DIAMETER

0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM"

AAUJ

SPLINE MAJOR DIAMETER

0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM"

AAUR

GRIP DIAMETER

0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM"

AAWB

SHANK UNTHREADED HOLE DIAMETER

0.070 INCHES NOMINAL THREADS"

ABQJ

POINT STYLE

FLAT"

ABQZ

INTERNAL DRIVE STYLE

TORX"

AGAV

END ITEM IDENTIFICATION

F18 E/F"

AHYM

NOMINAL THREAD DIAMETER

0.190 INCHES"

ANEE

GRIP LENGTH

0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM"

CMLP

THREAD QUANTITY PER INCH

32"

CRSQ

COUNTERSINK ANGLE

99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"

CRZS

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER

1.114 INCHES MINIMUM THREADS AND 1.134 INCHES MAXIMUM THREADS"

CXCY

PART NAME ASSIGNED BY CONTROLLING AGENCY

BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS"

FEAT

SPECIAL FEATURES

N125 KSI SHEAR STRENGTH; FINISH - ALUMINUM PER MIL-C-83488, TYPE II, CLASS III PULS CETYL ALCOHOL PER MIL-L-87132, TYPE 1, GRADE B; INTENDED FOR USE IN ALUMINUM STRUCTURE WHERE APPLIED SEALANT WOULD NOT BE SUITABLE"

MATT

MATERIAL

NICKEL ALLOY 718 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

AAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"

THSD

THREAD SERIES DESIGNATOR

UNJF"