NSN 5305-00-253-5608 (5305002535608) Screw Drive Parts Catalog

The part belongs to NSN 5305-00-253-5608 is an Screw Drive produced by Bosch Rexroth Corporation Div In, Bundesamt Fuer Ausruestung, Kraus And Naimer Gmbh, Miscellaneous, Eca Etablissement Central Des. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5305-00-253-5608 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Screw Drive made by Bosch Rexroth Corporation Div In, Bundesamt Fuer Ausruestung, Kraus And Naimer Gmbh, Miscellaneous, Eca Etablissement Central Des that carries the NSN 5305-00-253-5608, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5305002535608 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AASB	FASTENER LENGTH	0.250 INCHES NOMINAL"
AASK	HEAD STYLE	ROUND"
AASL	HEAD DIAMETER	0.099 INCHES MINIMUM AND 0.113 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.043 INCHES MINIMUM AND 0.053 INCHES MAXIMUM"
AAVL	PILOT DIAMETER	0.060 INCHES MINIMUM AND 0.063 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM"
AGAV	END ITEM IDENTIFICATION	HELICOPTER LANDING SYSTEM, LAMPS MK III; COMPRESSOR, RECIPROCATING M4; ENGINE, AIRCRAFT, F100-PW-200 (F-16A/B/C/D); HELICOPTER, MH-53E; HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); TRAINER, B-1B AIRCRAFT"
CRGF	NONMACHINE THREAD STYLE	DRIVE SCREW (TYPE U)"
CTYF	NONMACHINE NOMINAL THREAD DIAMETER	0.073 INCHES"
MATT	MATERIAL	STEEL OVERALL"
SFTT	SURFACE TREATMENT	CADMIUM OVERALL"
ZZZT	NONDEFINITIVE SPEC/STD DATA	U TYPE AND 1P STYLE"
AASB	FASTENER LENGTH	0.250 INCHES NOMINAL"
AASK	HEAD STYLE	ROUND"
AASL	HEAD DIAMETER	0.099 INCHES MINIMUM AND 0.113 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.043 INCHES MINIMUM AND 0.053 INCHES MAXIMUM"
AAVL	PILOT DIAMETER	0.060 INCHES MINIMUM AND 0.063 INCHES MAXIMUM"
AAVM	PILOT LENGTH	0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM"
AGAV	END ITEM IDENTIFICATION	HELICOPTER LANDING SYSTEM, LAMPS MK III; COMPRESSOR, RECIPROCATING M4; ENGINE, AIRCRAFT, F100-PW-200 (F-16A/B/C/D); HELICOPTER, MH-53E; HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); TRAINER, B-1B AIRCRAFT"
CRGF	NONMACHINE THREAD STYLE	DRIVE SCREW (TYPE U)"
CTYF	NONMACHINE NOMINAL THREAD DIAMETER	0.073 INCHES"
MATT	MATERIAL	STEEL OVERALL"
SFTT	SURFACE TREATMENT	CADMIUM OVERALL"
ZZZT	NONDEFINITIVE SPEC/STD DATA	U TYPE AND 1P STYLE"

MRC

Criteria

Characteristic

AASB

FASTENER LENGTH

0.250 INCHES NOMINAL"

AASK

HEAD STYLE

ROUND"

AASL

HEAD DIAMETER

0.099 INCHES MINIMUM AND 0.113 INCHES MAXIMUM"

AASU

HEAD HEIGHT

0.043 INCHES MINIMUM AND 0.053 INCHES MAXIMUM"

AAVL

PILOT DIAMETER

0.060 INCHES MINIMUM AND 0.063 INCHES MAXIMUM"

AAVM

PILOT LENGTH

0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM"

AGAV

END ITEM IDENTIFICATION

HELICOPTER LANDING SYSTEM, LAMPS MK III; COMPRESSOR, RECIPROCATING M4; ENGINE, AIRCRAFT, F100-PW-200 (F-16A/B/C/D); HELICOPTER, MH-53E; HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); TRAINER, B-1B AIRCRAFT"

CRGF

NONMACHINE THREAD STYLE

DRIVE SCREW (TYPE U)"

CTYF

NONMACHINE NOMINAL THREAD DIAMETER

0.073 INCHES"

MATT

MATERIAL

STEEL OVERALL"

SFTT

SURFACE TREATMENT

CADMIUM OVERALL"

ZZZT

NONDEFINITIVE SPEC/STD DATA

U TYPE AND 1P STYLE"