NSN 5305-00-006-4867 (5305000064867) Screw Cap Socket Head Parts Catalog

The part belongs to NSN 5305-00-006-4867 is an Screw Cap Socket Head produced by Sps Technologies Inc, Eca Etablissement Central Des, Paeaeesikunta Logistiikkaosasto, Bristol Babcock Inc Instruments, Miscellaneous. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 5305-00-006-4867 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Screw Cap Socket Head made by Sps Technologies Inc, Eca Etablissement Central Des, Paeaeesikunta Logistiikkaosasto, Bristol Babcock Inc Instruments, Miscellaneous that carries the NSN 5305-00-006-4867, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 5305000064867 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT CHAMFER"
AASL	HEAD DIAMETER	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.046 INCHES MINIMUM FIRST HOLE AND 0.050 INCHES MAXIMUM FIRST HOLE"
ABQZ	INTERNAL DRIVE STYLE	HEXAGON"
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES"
ASDB	WIDTH ACROSS FLATS	0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	28"
CQBC	MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH"
CQFM	HARDNESS RATING	80.0 ROCKWELL B MINIMUM OVERALL"
CQHQ	MINIMUM YIELD STRENGTH	30000 POUNDS PER SQUARE INCH"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.380 INCHES MINIMUM FIRST HOLE AND 1.447 INCHES MAXIMUM FIRST HOLE"
MATT	MATERIAL	STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM"
AASB	FASTENER LENGTH	1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT CHAMFER"
AASL	HEAD DIAMETER	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM"
AASU	HEAD HEIGHT	0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.046 INCHES MINIMUM FIRST HOLE AND 0.050 INCHES MAXIMUM FIRST HOLE"
ABQZ	INTERNAL DRIVE STYLE	HEXAGON"
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES"
ASDB	WIDTH ACROSS FLATS	0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	28"
CQBC	MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH"
CQFM	HARDNESS RATING	80.0 ROCKWELL B MINIMUM OVERALL"
CQHQ	MINIMUM YIELD STRENGTH	30000 POUNDS PER SQUARE INCH"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.380 INCHES MINIMUM FIRST HOLE AND 1.447 INCHES MAXIMUM FIRST HOLE"
MATT	MATERIAL	STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNF"

MRC

Criteria

Characteristic

AAJD

THREAD CLASS

3A"

AAJF

THREAD DIRECTION

RIGHT-HAND"

AASA

THREAD LENGTH

1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM"

AASB

FASTENER LENGTH

1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM"

AASK

HEAD STYLE

FLAT CHAMFER"

AASL

HEAD DIAMETER

0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM"

AASU

HEAD HEIGHT

0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM"

AAWB

SHANK UNTHREADED HOLE DIAMETER

0.046 INCHES MINIMUM FIRST HOLE AND 0.050 INCHES MAXIMUM FIRST HOLE"

ABQZ

INTERNAL DRIVE STYLE

HEXAGON"

AHYM

NOMINAL THREAD DIAMETER

0.250 INCHES"

ASDB

WIDTH ACROSS FLATS

0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM"

CMLP

THREAD QUANTITY PER INCH

28"

CQBC

MINIMUM TENSILE STRENGTH

80000 POUNDS PER SQUARE INCH"

CQFM

HARDNESS RATING

80.0 ROCKWELL B MINIMUM OVERALL"

CQHQ

MINIMUM YIELD STRENGTH

30000 POUNDS PER SQUARE INCH"

CRZS

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER

1.380 INCHES MINIMUM FIRST HOLE AND 1.447 INCHES MAXIMUM FIRST HOLE"

MATT

MATERIAL

STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL"

MDCL

MATERIAL DOCUMENT AND CLASSIFICATION

66 FED STD ALL MATERIAL RESPONSES OVERALL"

SFTT

SURFACE TREATMENT

PASSIVATE OVERALL"

STDC

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION

QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"

THSD

THREAD SERIES DESIGNATOR

UNF"