| MRC | Criteria | Characteristic |
|---|
| AAAR | NOMINAL PIPE SIZE ACCOMMODATED | 1.500 INCHES 1ST END" |
| ADQU | FLOW CONTROL DEVICE | DISK" |
| ADSR | BONNET TYPE | INSIDE SCREW" |
| ADST | BONNET ATTACHMENT METHOD | THREADED" |
| ADZH | RENEWABLE SEAT RING TYPE | THREADED" |
| AEHZ | MAXIMUM OPERATING TEMP | 150.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| AHNC | CONNECTION STYLE | SOCKET 1ST END" |
| AQLR | VALVE OPERATION METHOD | MANUAL" |
| AWLS | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END" |
| CBBL | FEATURES PROVIDED | BONNET PACKING" |
| CQGM | MAXIMUM OPERATING PRESSURE | 700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| MATT | MATERIAL | COPPER ALLOY 922 BODY" |
| MATT | MATERIAL | NICKEL ALLOY R-405 FLOW CONTROL DEVICE" |
| MATT | MATERIAL | NICKEL ALLOY R-405 SEAT" |
| MATT | MATERIAL | NICKEL ALLOY R-405 STEM" |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE" |
| STYL | STYLE DESIGNATOR | ANGLE" |
| TEST | TEST DATA DOCUMENT | 96169-2620-902 ASSYDF1 1/2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC G" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS" |
| AAAR | NOMINAL PIPE SIZE ACCOMMODATED | 1.500 INCHES 1ST END" |
| ADQU | FLOW CONTROL DEVICE | DISK" |
| ADSR | BONNET TYPE | INSIDE SCREW" |
| ADST | BONNET ATTACHMENT METHOD | THREADED" |
| ADZH | RENEWABLE SEAT RING TYPE | THREADED" |
| AEHZ | MAXIMUM OPERATING TEMP | 150.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| AHNC | CONNECTION STYLE | SOCKET 1ST END" |
| AQLR | VALVE OPERATION METHOD | MANUAL" |
| AWLS | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END" |
| CBBL | FEATURES PROVIDED | BONNET PACKING" |
| CQGM | MAXIMUM OPERATING PRESSURE | 700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| MATT | MATERIAL | COPPER ALLOY 922 BODY" |
| MATT | MATERIAL | NICKEL ALLOY R-405 FLOW CONTROL DEVICE" |
| MATT | MATERIAL | NICKEL ALLOY R-405 SEAT" |
| MATT | MATERIAL | NICKEL ALLOY R-405 STEM" |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE" |
| STYL | STYLE DESIGNATOR | ANGLE" |
| TEST | TEST DATA DOCUMENT | 96169-2620-902 ASSYDF1 1/2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC G" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS" |
