Search By:
Thanks for Visiting Us At ASAP AOG!

Thanks for Visiting Us At ASAP AOG! Before You Go, Why Not Take a Look at Our Aircraft Parts Catalog? You Can Get One of the Most Competitive Quotes On the Market In 15 Minutes Or Less.

Request for Quote

We use cookies to ensure that we give you an amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

NSN 4730-01-143-1432 (4730011431432) Flange Pipe Swivel Retaining Parts Catalog

The part belongs to NSN 4730-01-143-1432 is an Flange Pipe Swivel Retaining produced by Society Of Automotiv, Sae, Marison Industries Inc Barco Div. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 4730-01-143-1432 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Flange Pipe Swivel Retaining made by Society Of Automotiv, Sae, Marison Industries Inc Barco Div that carries the NSN 4730-01-143-1432, you can rely on us to provide you with the necessary parts from our available inventory.


At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 4730011431432 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.


Alternative NSN: 4730-01-143-1432
Item Name: Flange Pipe Swivel Retaining
FSG: 47 Pipe Tubing Hose and Fittings
Federal Supply Class (FSC): 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings
NCB Code: USA (01)
Manufacturers: Marison Industries Inc Barco Div, Sae, Society Of Automotiv

Manufacturer’s List for NSN 4730-01-143-1432

marison industries inc barco div sae society of automotiv

Part Number's List for NSN 4730-01-143-1432

Part No.
Manufacturer
Item Name
Availability
RFQ
Flange Pipe Swivel Retaining
YES
RFQ
sae
Flange Pipe Swivel Retaining
YES
RFQ
Flange Pipe Swivel Retaining
YES
RFQ
Flange Pipe Swivel Retaining
YES
RFQ
sae
Flange Pipe Swivel Retaining
YES
RFQ

Technical Characteristics of NSN 4730011431432

MRCCriteriaCharacteristic
ABMDRECESS DIAMETER2.521 INCHES MINIMUM AND 2.541 INCHES MAXIMUM"
ABMHRECESS DEPTH0.470 INCHES MINIMUM AND 0.480 INCHES MAXIMUM"
ABNMTHICKNESS1.190 INCHES NOMINAL"
ACSUNOMINAL PIPE SIZE FOR WHICH DESIGNED1.500 INCHES"
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.360 INCHES NOMINAL"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES MINIMUM AND 3.135 INCHES MAXIMUM"
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.627 INCHES MINIMUM AND 0.687 INCHES MAXIMUM"
ADVEOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.680 INCHES NOMINAL"
AECSBOLT HOLE QUANTITY4"
AFQNFLANGE LENGTH4.380 INCHES MINIMUM AND 4.500 INCHES MAXIMUM"
AGFFFLANGE WIDTH3.660 INCHES NOMINAL"
AHNXBOLT HOLE DIAMETER0.656 INCHES NOMINAL"
AJEGNECK HEIGHT0.500 INCHES NOMINAL"
AJEMFLANGE SECTION STYLERECESSED FACE, RAISED NECK"
AKWEFACE SEATING SURFACE CONDITIONGROUND"
CQCJMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED6000.0 POUNDS PER SQUARE INCH ANY ACCEPTABLE"
FEATSPECIAL FEATURESSPLIT FLANGE"
MATTMATERIALIRON"
STYLSTYLE DESIGNATORRECTANGULAR, WITH BOLT HOLES"
ZZZKSPECIFICATION/STANDARD DATA81343-J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"
ZZZTNONDEFINITIVE SPEC/STD DATA4 FIGURE AND 62 CODE"
ABMDRECESS DIAMETER2.521 INCHES MINIMUM AND 2.541 INCHES MAXIMUM"
ABMHRECESS DEPTH0.470 INCHES MINIMUM AND 0.480 INCHES MAXIMUM"
ABNMTHICKNESS1.190 INCHES NOMINAL"
ACSUNOMINAL PIPE SIZE FOR WHICH DESIGNED1.500 INCHES"
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.360 INCHES NOMINAL"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES MINIMUM AND 3.135 INCHES MAXIMUM"
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.627 INCHES MINIMUM AND 0.687 INCHES MAXIMUM"
ADVEOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.680 INCHES NOMINAL"
AECSBOLT HOLE QUANTITY4"
AFQNFLANGE LENGTH4.380 INCHES MINIMUM AND 4.500 INCHES MAXIMUM"
AGFFFLANGE WIDTH3.660 INCHES NOMINAL"
AHNXBOLT HOLE DIAMETER0.656 INCHES NOMINAL"
AJEGNECK HEIGHT0.500 INCHES NOMINAL"
AJEMFLANGE SECTION STYLERECESSED FACE, RAISED NECK"
AKWEFACE SEATING SURFACE CONDITIONGROUND"
CQCJMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED6000.0 POUNDS PER SQUARE INCH ANY ACCEPTABLE"
FEATSPECIAL FEATURESSPLIT FLANGE"
MATTMATERIALIRON"
STYLSTYLE DESIGNATORRECTANGULAR, WITH BOLT HOLES"
ZZZKSPECIFICATION/STANDARD DATA81343-J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"
ZZZTNONDEFINITIVE SPEC/STD DATA4 FIGURE AND 62 CODE"