NSN 4720-00-607-2676 (4720006072676) Hose Assembly Nonmetallic Parts Catalog

The part belongs to NSN 4720-00-607-2676 is an Hose Assembly Nonmetallic produced by Smiths Tubular Systemslaconia I, General Electric Company. This specific NSN is a numeric identifier assigned by the Defense Logistics Agency (DLA) to categorize all products distributed by the NATO federal supply chain. At ASAP AOG, a company owned and operated by ASAP Semiconductor, we possess parts that belong to the NSN 4720-00-607-2676 and these are readily available in our current inventory. Our on-hand inventory contains parts belonging to this particular NSN that you can easily access. So, if you need an Hose Assembly Nonmetallic made by Smiths Tubular Systemslaconia I, General Electric Company that carries the NSN 4720-00-607-2676, you can rely on us to provide you with the necessary parts from our available inventory.

At ASAP AOG, we are dedicated to providing competitive quotes for premium NATO parts. We work hard to ensure all the national stock number 4720006072676 parts are fully certified and up to standard. Our supply chain is extensive and one of the fastest in the industry. Have a question or need a quote today? Simply fill out the RFQ below.

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJD	THREAD CLASS	3B 2ND END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.103 INCHES NOMINAL"
ABKV	OUTSIDE DIAMETER	0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM"
ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	110.0"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 2ND END"
AKUU	END CONNECTION DESIGN	ELBOW 1ST END"
AKUU	END CONNECTION DESIGN	ELBOW 2ND END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 2ND END"
CBBL	FEATURES PROVIDED	NUTS DRILLED FOR LOCKWIRE"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQJX	NOMINAL THREAD SIZE	0.375 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.375 INCHES 2ND END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CQRB	SEAT ANGLE	37.0 DEGREES 2ND END"
CRFY	FLOW ANGLE	45.0 DEGREES 1ST END"
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND FUEL RESISTANT"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	22.250 INCHES NOMINAL WORKING"
FEAT	SPECIAL FEATURES	W/SILICONE RUBBER SLEEVE,ORIFICE IN 45 DEG END"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNJF 2ND END"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJD	THREAD CLASS	3B 2ND END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.103 INCHES NOMINAL"
ABKV	OUTSIDE DIAMETER	0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM"
ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG	110.0"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 2ND END"
AKUU	END CONNECTION DESIGN	ELBOW 1ST END"
AKUU	END CONNECTION DESIGN	ELBOW 2ND END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 2ND END"
CBBL	FEATURES PROVIDED	NUTS DRILLED FOR LOCKWIRE"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQJX	NOMINAL THREAD SIZE	0.375 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.375 INCHES 2ND END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CQRB	SEAT ANGLE	37.0 DEGREES 2ND END"
CRFY	FLOW ANGLE	45.0 DEGREES 1ST END"
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND FUEL RESISTANT"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	22.250 INCHES NOMINAL WORKING"
FEAT	SPECIAL FEATURES	W/SILICONE RUBBER SLEEVE,ORIFICE IN 45 DEG END"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNJF 2ND END"

MRC

Criteria

Characteristic

AAGR

CROSS-SECTIONAL SHAPE STYLE

ROUND"

AAJD

THREAD CLASS

3B 1ST END"

AAJD

THREAD CLASS

3B 2ND END"

AAJF

THREAD DIRECTION

RIGHT-HAND 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 2ND END"

AARX

INSIDE DIAMETER

0.103 INCHES NOMINAL"

ABKV

OUTSIDE DIAMETER

0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM"

ADKX

ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG

110.0"

AHNC

CONNECTION STYLE

SWIVEL NUT FLARE 1ST END"

AHNC

CONNECTION STYLE

SWIVEL NUT FLARE 2ND END"

AKUU

END CONNECTION DESIGN

ELBOW 1ST END"

AKUU

END CONNECTION DESIGN

ELBOW 2ND END"

AWLS

CONNECTION TYPE

THREADED INTERNAL TUBE 1ST END"

AWLS

CONNECTION TYPE

THREADED INTERNAL TUBE 2ND END"

CBBL

FEATURES PROVIDED

NUTS DRILLED FOR LOCKWIRE"

CQCS

LAYER COMPOSITION AND LOCATION

OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"

CQJX

NOMINAL THREAD SIZE

0.375 INCHES 1ST END"

CQJX

NOMINAL THREAD SIZE

0.375 INCHES 2ND END"

CQRB

SEAT ANGLE

37.0 DEGREES 1ST END"

CQRB

SEAT ANGLE

37.0 DEGREES 2ND END"

CRFY

FLOW ANGLE

45.0 DEGREES 1ST END"

CRFY

FLOW ANGLE

90.0 DEGREES 2ND END"

CRJM

OUTER COVERING ENVIRONMENTAL PROTECTION

CORROSION RESISTANT AND FUEL RESISTANT"

CRWL

INSIDE SURFACE CONDITION

SMOOTH"

CRXX

MEASURING METHOD AND LENGTH

22.250 INCHES NOMINAL WORKING"

FEAT

SPECIAL FEATURES

W/SILICONE RUBBER SLEEVE,ORIFICE IN 45 DEG END"

THSD

THREAD SERIES DESIGNATOR

UNJF 1ST END"

THSD

THREAD SERIES DESIGNATOR

UNJF 2ND END"

AAGR

CROSS-SECTIONAL SHAPE STYLE

ROUND"

AAJD

THREAD CLASS

3B 1ST END"

AAJD

THREAD CLASS

3B 2ND END"

AAJF

THREAD DIRECTION

RIGHT-HAND 1ST END"

AAJF

THREAD DIRECTION

RIGHT-HAND 2ND END"

AARX

INSIDE DIAMETER

0.103 INCHES NOMINAL"

ABKV

OUTSIDE DIAMETER

0.215 INCHES MINIMUM AND 0.240 INCHES MAXIMUM"

ADKX

ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG

110.0"

AHNC

CONNECTION STYLE

SWIVEL NUT FLARE 1ST END"

AHNC

CONNECTION STYLE

SWIVEL NUT FLARE 2ND END"

AKUU

END CONNECTION DESIGN

ELBOW 1ST END"

AKUU

END CONNECTION DESIGN

ELBOW 2ND END"

AWLS

CONNECTION TYPE

THREADED INTERNAL TUBE 1ST END"

AWLS

CONNECTION TYPE

THREADED INTERNAL TUBE 2ND END"

CBBL

FEATURES PROVIDED

NUTS DRILLED FOR LOCKWIRE"

CQCS

LAYER COMPOSITION AND LOCATION

OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"

CQJX

NOMINAL THREAD SIZE

0.375 INCHES 1ST END"

CQJX

NOMINAL THREAD SIZE

0.375 INCHES 2ND END"

CQRB

SEAT ANGLE

37.0 DEGREES 1ST END"

CQRB

SEAT ANGLE

37.0 DEGREES 2ND END"

CRFY

FLOW ANGLE

45.0 DEGREES 1ST END"

CRFY

FLOW ANGLE

90.0 DEGREES 2ND END"

CRJM

OUTER COVERING ENVIRONMENTAL PROTECTION

CORROSION RESISTANT AND FUEL RESISTANT"

CRWL

INSIDE SURFACE CONDITION

SMOOTH"

CRXX

MEASURING METHOD AND LENGTH

22.250 INCHES NOMINAL WORKING"

FEAT

SPECIAL FEATURES

W/SILICONE RUBBER SLEEVE,ORIFICE IN 45 DEG END"

THSD

THREAD SERIES DESIGNATOR

UNJF 1ST END"

THSD

THREAD SERIES DESIGNATOR

UNJF 2ND END"

NSN 4720-00-607-2676 (4720006072676) Hose Assembly Nonmetallic Parts Catalog

Manufacturer’s List for NSN 4720-00-607-2676

Part Number's List for NSN 4720-00-607-2676

Technical Characteristics of NSN 4720006072676

Search by Aircraft Parts

Search by NSN Parts

Search by Connector Parts